Boas pessoal,
Decidi partilhar convosco esta maravilha.
Como o o router é powered by linux e existe firmware open source , o pessoal do forum openwrt consegui alterar o firware standard do router e adicionar features( Correr apps apartir de pen usb) como melhorar algumas existentes.
Aqui fica a ultima versão do firmware e o changelog:
Download your preferred flavor here:
bcm96348GW_fs_kernel_3.02L.01.-090602_1528.zip (AnnexA)
bcm96348GW_fs_kernel_3.02L.01.-090602_2330.zip (AnnexA with NARS)
Changelog:
Conteudo para colocarem numa pen com aplicações:
Neste momento estou a usar este firmware sem problemas alguns a não ser o tal problema que vem no changelog relativamente ao sinal de linha.
Kudos ao Andrew Popov e StephanV3 por este firmware.
http://www.modemboard.net/index.php?page=Thread&threadID=755
Cumps.
Decidi partilhar convosco esta maravilha.
Como o o router é powered by linux e existe firmware open source , o pessoal do forum openwrt consegui alterar o firware standard do router e adicionar features( Correr apps apartir de pen usb) como melhorar algumas existentes.
Aqui fica a ultima versão do firmware e o changelog:
Download your preferred flavor here:
bcm96348GW_fs_kernel_3.02L.01.-090602_1528.zip (AnnexA)
bcm96348GW_fs_kernel_3.02L.01.-090602_2330.zip (AnnexA with NARS)
Changelog:
+ New AnnexB version!
* hd shutdown recover patch to kernel (thanks Sergey Lvov)
* New stupid-ftpd version with more fixes (thanks Sergey Lvov)
* e2fsprogs now are stripped down
- removed nls_ascii
+ New stupid-ftpd features:
+ users that begins with "admin" has access to ftp root "/" instead of "/ftp_pub/"
+ new config file for addition/changes is read after original one, no more need to do tricks to extend stupid-ftpd config: "/var/stupid-ftpd-alternate.conf"
+ New ADSL physical layer and new adsl*.ko + adslctl programs (MANY thanks to StefanV3 for finding and testing them).
+ adsl phy A2p023k/B2p023k (USR9113)
+ adsldd.ko d20e (Belkin F5D7633)
+ adslctl 1.0 (Belkin F5D7633)
+ New ADSL drivers compatible with dmt 8.07 - http://dmt.mhilfe.de/
+ cp866 cp1251 loaded by default (no more modules)
+ added wc command (try for example "wc -l /proc/net/ip_conntrack" for tuning your setup)
KNOWN PROBLEMS:
* in adsl statistics, SNR Margin, is 0.0 in up- and downstream. Attenuation shows SNRM values, Output-Power is showing values from attenuation and Attainable Rate shows Output Power. A little concern for a better ADSL driver and a complete compatibility with DMT: http://dmt.mhilfe.de/
Built-in commands:
-------------------
. : break cd continue eval exec exit export help login newgrp
read readonly set shift times trap umask wait [ ar arping awk
basename bunzip2 busybox bzcat cat chgrp chmod chown chroot chvt
clear cmp cp crond date dd deallocvt df dirname dmesg dos2unix
dpkg dpkg-deb du echo egrep env expr false fdisk fgrep find free
ftpget ftpput getopt grep gunzip gzip halt hdparm head hexdump
hostid hostname ifconfig init insmod install ipaddr iproute kill
killall klogd linuxrc ln logger logread ls lsmod md5sum mesg
mkdir mknod mkswap mktemp more mount msh mv netstat nslookup
patch pidof ping pipe_progress poweroff printf ps pwd readlink
realpath reboot renice reset rm rmdir rmmod route rpm run-parts
sed sendarp sh sleep sort strings swapoff swapon sync sysctl
sysinfo syslogd tail tar tee telnet test tftp tftpd time top
touch tr traceroute true tty umount uname uncompress uniq unix2dos
unzip uptime usleep uudecode uuencode vconfig vi watch wget which
xargs yes zcat
Conteudo para colocarem numa pen com aplicações:
HD-Content for TheDrake's V1.0.3.5 Build 090602 Firmware by AndreyPopov Build 0526
AndreyPopov wrote:
+ renew apps to TheDrake 0517 firmware
+ added darkstat to hd apps
+ added darkstat to services page (darkstat start only if WAN interface UP!)
+ added "Show config" to each services
+ fully worked Midnight Commander
+ dctcs work with IE
+ added some iptables commands to startup to enable services on WAN (please test)
+ added OpenSSH to hd apps (to generate keys run /var/harddisk/asus/ssh_keygen.sh)
+ added Currently running tasks button in Services
+ added sshd and cron to services
+ prepear to runnig scheduled scripts, please paste your scripts to:
/var/harddisk/asus/etc/cron.5mins
/var/harddisk/asus/etc/cron.hourly
/var/harddisk/asus/etc/cron.daily
/var/harddisk/asus/etc/cron.weekly
/var/harddisk/asus/etc/cron.monthly
- download file ftp://78.25.8.242/wl600/wl600_hd_0526.tar.gz
- enable ftp on router
- by ftp copy file to router
- connect to router by telnet
- after router menu type sh command
- then:
Quellcode
1
2
cd /var/harddisk
tar xzvf wl600_hd_0526.tar.gz
wait until unpack. unpack may be long time that's why periodicaly (one time in five minutes) press any key (arrow for example) or set in terminal software keepalive settings.
Midnight Commander can start in telnet by:
Quellcode
1
/var/harddisk/asus/mc.sh
if you file system ext2 after unpack you have ALL worked apps.
if you file system FAT/FAT32 than in telnet:
Quellcode
1
/var/harddisk/asus/fat32_libs.sh
Neste momento estou a usar este firmware sem problemas alguns a não ser o tal problema que vem no changelog relativamente ao sinal de linha.
Kudos ao Andrew Popov e StephanV3 por este firmware.
http://www.modemboard.net/index.php?page=Thread&threadID=755
Cumps.