Ajuda a instalar Pen usb Wireless

B

bows

Power Member
Boas malta preciso de ajuda na instalaçao de uma pen wireless ja tentei no google mas n consigo, se alguem me puder ajudar agradeço a pen é ralink technology RT2501USB.

Cumps.
 
Ubuntu certo?

Penso que esse driver já deve estar incluído por omissão e deveria estar a funcionar.

O que tens nos logs?

Faz
Código: 
dmesg

E vê em /var/log/kern.log e /var/log/syslog
 
Código: 
fffff
[    1.207505] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[    1.207511] pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
[    1.207521] pci 0000:00:1c.2:   MEM window: 0xda000000-0xdbffffff
[    1.207529] pci 0000:00:1c.2:   PREFETCH window: 0x000000d4000000-0x000000d5ffffff
[    1.207550] pci 0000:07:06.0: CardBus bridge, secondary bus 0000:08
[    1.207555] pci 0000:07:06.0:   IO window: 0x005400-0x0054ff
[    1.207563] pci 0000:07:06.0:   IO window: 0x005800-0x0058ff
[    1.207572] pci 0000:07:06.0:   PREFETCH window: 0x50000000-0x53ffffff
[    1.207581] pci 0000:07:06.0:   MEM window: 0x54000000-0x57ffffff
[    1.207589] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[    1.207596] pci 0000:00:1e.0:   IO window: 0x5000-0x5fff
[    1.207605] pci 0000:00:1e.0:   MEM window: 0xdc100000-0xdc1fffff
[    1.207613] pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x00000053ffffff
[    1.207636] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.207644] pci 0000:00:01.0: setting latency timer to 64
[    1.207658] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.207666] pci 0000:00:1c.0: setting latency timer to 64
[    1.207679] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.207687] pci 0000:00:1c.1: setting latency timer to 64
[    1.207702] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.207710] pci 0000:00:1c.2: setting latency timer to 64
[    1.207722] pci 0000:00:1e.0: setting latency timer to 64
[    1.207735] pci 0000:07:06.0: enabling device (0000 -> 0003)
[    1.207742] pci 0000:07:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.207755] bus: 00 index 0 io port: [0x00-0xffff]
[    1.207759] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    1.207764] bus: 01 index 0 io port: [0x2000-0x2fff]
[    1.207769] bus: 01 index 1 mmio: [0xdc000000-0xdc0fffff]
[    1.207774] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]
[    1.207778] bus: 01 index 3 mmio: [0x0-0x0]
[    1.207782] bus: 02 index 0 mmio: [0x0-0x0]
[    1.207786] bus: 02 index 1 mmio: [0x0-0x0]
[    1.207789] bus: 02 index 2 mmio: [0x0-0x0]
[    1.207793] bus: 02 index 3 mmio: [0x0-0x0]
[    1.207797] bus: 03 index 0 io port: [0x3000-0x3fff]
[    1.207802] bus: 03 index 1 mmio: [0xd8000000-0xd9ffffff]
[    1.207807] bus: 03 index 2 mmio: [0xd2000000-0xd3ffffff]
[    1.207811] bus: 03 index 3 mmio: [0x0-0x0]
[    1.207815] bus: 05 index 0 io port: [0x4000-0x4fff]
[    1.207820] bus: 05 index 1 mmio: [0xda000000-0xdbffffff]
[    1.207824] bus: 05 index 2 mmio: [0xd4000000-0xd5ffffff]
[    1.207828] bus: 05 index 3 mmio: [0x0-0x0]
[    1.207833] bus: 07 index 0 io port: [0x5000-0x5fff]
[    1.207837] bus: 07 index 1 mmio: [0xdc100000-0xdc1fffff]
[    1.207842] bus: 07 index 2 mmio: [0x50000000-0x53ffffff]
[    1.207846] bus: 07 index 3 io port: [0x00-0xffff]
[    1.207851] bus: 07 index 4 mmio: [0x000000-0xffffffff]
[    1.207855] bus: 08 index 0 io port: [0x5400-0x54ff]
[    1.207859] bus: 08 index 1 io port: [0x5800-0x58ff]
[    1.207864] bus: 08 index 2 mmio: [0x50000000-0x53ffffff]
[    1.207869] bus: 08 index 3 mmio: [0x54000000-0x57ffffff]
[    1.207884] NET: Registered protocol family 2
[    1.220098] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.220535] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.221260] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.221617] TCP: Hash tables configured (established 131072 bind 65536)
[    1.221622] TCP reno registered
[    1.228133] NET: Registered protocol family 1
[    1.228349] checking if image is initramfs... it is
[    2.454472] Freeing initrd memory: 7377k freed
[    2.454527] Simple Boot Flag at 0x36 set to 0x1
[    2.454835] cpufreq: No nForce2 chipset.
[    2.455081] audit: initializing netlink socket (disabled)
[    2.455114] type=2000 audit(1239117842.452:1): initialized
[    2.469671] highmem bounce pool size: 64 pages
[    2.469681] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.472363] VFS: Disk quotas dquot_6.5.1
[    2.472477] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.473704] fuse init (API version 7.10)
[    2.473880] msgmni has been set to 1724
[    2.474206] alg: No test for stdrng (krng)
[    2.474231] io scheduler noop registered
[    2.474235] io scheduler anticipatory registered
[    2.474239] io scheduler deadline registered
[    2.474267] io scheduler cfq registered (default)
[    2.474417] pci 0000:01:00.0: Boot video device
[    2.474463] pci 0000:07:08.0: Firmware left e100 interrupts enabled; disabling
[    2.616532] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    2.616589] pcieport-driver 0000:00:01.0: found MSI capability
[    2.616627] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[    2.616644] pci_express 0000:00:01.0:pcie00: allocate port service
[    2.616672] pci_express 0000:00:01.0:pcie03: allocate port service
[    2.616752] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    2.616812] pcieport-driver 0000:00:1c.0: found MSI capability
[    2.616855] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[    2.616877] pci_express 0000:00:1c.0:pcie00: allocate port service
[    2.616901] pci_express 0000:00:1c.0:pcie02: allocate port service
[    2.616925] pci_express 0000:00:1c.0:pcie03: allocate port service
[    2.617036] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    2.617098] pcieport-driver 0000:00:1c.1: found MSI capability
[    2.617141] pcieport-driver 0000:00:1c.1: irq 2301 for MSI/MSI-X
[    2.617162] pci_express 0000:00:1c.1:pcie00: allocate port service
[    2.617192] pci_express 0000:00:1c.1:pcie02: allocate port service
[    2.617220] pci_express 0000:00:1c.1:pcie03: allocate port service
[    2.617321] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    2.617382] pcieport-driver 0000:00:1c.2: found MSI capability
[    2.617424] pcieport-driver 0000:00:1c.2: irq 2300 for MSI/MSI-X
[    2.617446] pci_express 0000:00:1c.2:pcie00: allocate port service
[    2.617471] pci_express 0000:00:1c.2:pcie02: allocate port service
[    2.617495] pci_express 0000:00:1c.2:pcie03: allocate port service
[    2.617618] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.617795] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.618023] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    2.618485] ACPI: AC Adapter [ADP0] (off-line)
[    2.624455] ACPI: Battery Slot [BAT0] (battery present)
[    2.624603] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.624608] ACPI: Power Button (FF) [PWRF]
[    2.624697] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    2.624787] ACPI: Lid Switch [LID]
[    2.624873] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    2.624878] ACPI: Power Button (CM) [PWRB]
[    2.625159] fan PNP0C0B:00: registered as cooling_device0
[    2.625171] ACPI: Fan [FAN0] (off)
[    2.626133] ACPI: SSDT 3FE7E940, 01A8 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
[    2.626863] ACPI: SSDT 3FE7E6DF, 01DC (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
[    2.627653] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    2.627691] processor ACPI_CPU:00: registered as cooling_device1
[    2.627699] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.628369] ACPI: SSDT 3FE7EAE8, 0089 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
[    2.629067] ACPI: SSDT 3FE7E8BB, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
[    2.630038] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    2.630076] processor ACPI_CPU:01: registered as cooling_device2
[    2.630084] ACPI: Processor [CPU1] (supports 8 throttling states)
[    2.700733] thermal LNXTHERM:01: registered as thermal_zone0
[    2.700962] ACPI: Thermal Zone [TZ00] (22 C)
[    2.704815] thermal LNXTHERM:02: registered as thermal_zone1
[    2.714523] ACPI: Transitioning device [FAN0] to D0
[    2.714528] ACPI: Unable to turn cooling device [f6c13468] 'on'
[    2.714535] ACPI: Thermal Zone [TZ01] (15 C)
[    2.714643] isapnp: Scanning for PnP cards...
[    3.069435] isapnp: No Plug & Play device found
[    3.077455] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    3.079362] brd: module loaded
[    3.079974] loop: module loaded
[    3.080095] Fixed MDIO Bus: probed
[    3.080105] PPP generic driver version 2.4.2
[    3.080214] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    3.080267] Driver 'sd' needs updating - please use bus_type methods
[    3.080285] Driver 'sr' needs updating - please use bus_type methods
[    3.080426] ata_piix 0000:00:1f.2: version 2.12
[    3.080451] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.080458] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    3.232029] ata_piix 0000:00:1f.2: setting latency timer to 64
[    3.232160] scsi0 : ata_piix
[    3.232322] scsi1 : ata_piix
[    3.234243] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[    3.234249] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[    3.396623] ata1.00: ATA-7: HTS541080G9SA00, MB4OC60R, max UDMA/100
[    3.396629] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.412650] ata1.00: configured for UDMA/100
[    3.576639] ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.60, max UDMA/33
[    3.592614] ata2.00: configured for UDMA/33
[    3.593180] scsi 0:0:0:0: Direct-Access     ATA      HTS541080G9SA00  MB4O PQ: 0 ANSI: 5
[    3.593367] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[    3.593401] sd 0:0:0:0: [sda] Write Protect is off
[    3.593406] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.593460] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.593590] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[    3.593621] sd 0:0:0:0: [sda] Write Protect is off
[    3.593626] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.593678] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.593686]  sda: sda1 sda2 < sda5 >
[    3.638340] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.638419] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.640336] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-841S  1.60 PQ: 0 ANSI: 5
[    3.644953] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.644959] Uniform CD-ROM driver Revision: 3.20
[    3.645120] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.645188] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.646447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.646482] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.646513] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.646520] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.646630] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    3.650549] ehci_hcd 0000:00:1d.7: debug port 1
[    3.650559] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    3.650583] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc404000
[    3.664016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.664154] usb usb1: configuration #1 chosen from 1 choice
[    3.664209] hub 1-0:1.0: USB hub found
[    3.664222] hub 1-0:1.0: 8 ports detected
[    3.664427] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.664462] uhci_hcd: USB Universal Host Controller Interface driver
[    3.664501] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.664512] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.664518] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.664597] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.664631] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[    3.664766] usb usb2: configuration #1 chosen from 1 choice
[    3.664816] hub 2-0:1.0: USB hub found
[    3.664828] hub 2-0:1.0: 2 ports detected
[    3.664986] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.664997] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.665003] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.665081] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.665126] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[    3.665262] usb usb3: configuration #1 chosen from 1 choice
[    3.665313] hub 3-0:1.0: USB hub found
[    3.665324] hub 3-0:1.0: 2 ports detected
[    3.665478] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.665488] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.665494] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.665580] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.665625] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    3.665759] usb usb4: configuration #1 chosen from 1 choice
[    3.665810] hub 4-0:1.0: USB hub found
[    3.665821] hub 4-0:1.0: 2 ports detected
[    3.665977] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    3.665988] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    3.665994] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.666073] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    3.666118] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    3.666262] usb usb5: configuration #1 chosen from 1 choice
[    3.666312] hub 5-0:1.0: USB hub found
[    3.666324] hub 5-0:1.0: 2 ports detected
[    3.666569] usbcore: registered new interface driver libusual
[    3.666623] usbcore: registered new interface driver usbserial
[    3.666643] USB Serial support registered for generic
[    3.666671] usbcore: registered new interface driver usbserial_generic
[    3.666675] usbserial: USB Serial Driver core
[    3.666766] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.668958] i8042.c: Detected active multiplexing controller, rev 1.1.
[    3.670452] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.670462] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    3.670469] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    3.670474] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    3.670479] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    3.672071] mice: PS/2 mouse device common for all mice
[    3.688119] rtc_cmos 00:07: RTC can wake from S4
[    3.688175] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    3.688215] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.688324] device-mapper: uevent: version 1.0.3
[    3.688490] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [EMAIL="[email protected]"][email protected][/EMAIL]
[    3.688642] device-mapper: multipath: version 1.0.5 loaded
[    3.688648] device-mapper: multipath round-robin: version 1.0.0 loaded
[    3.688793] EISA: Probing bus 0 at eisa.0
[    3.688803] Cannot allocate resource for EISA slot 1
[    3.688808] Cannot allocate resource for EISA slot 2
[    3.688813] Cannot allocate resource for EISA slot 3
[    3.688817] Cannot allocate resource for EISA slot 4
[    3.688822] Cannot allocate resource for EISA slot 5
[    3.688843] EISA: Detected 0 cards.
[    3.689066] cpuidle: using governor ladder
[    3.689297] cpuidle: using governor menu
[    3.690273] TCP cubic registered
[    3.690469] NET: Registered protocol family 10
[    3.691291] lo: Disabled Privacy Extensions
[    3.691934] NET: Registered protocol family 17
[    3.691964] Bluetooth: L2CAP ver 2.11
[    3.691968] Bluetooth: L2CAP socket layer initialized
[    3.691974] Bluetooth: SCO (Voice Link) ver 0.6
[    3.691977] Bluetooth: SCO socket layer initialized
[    3.692048] Bluetooth: RFCOMM socket layer initialized
[    3.692052] Marking TSC unstable due to TSC halts in idle
[    3.692065] Bluetooth: RFCOMM TTY layer initialized
[    3.692069] Bluetooth: RFCOMM ver 1.10
[    3.692748] Using IPI No-Shortcut mode
[    3.692873] registered taskstats version 1
[    3.692988]   Magic number: 5:477:436
[    3.693095] rtc_cmos 00:07: setting system clock to 2009-04-07 15:24:04 UTC (1239117844)
[    3.693098] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.693100] EDD information not available.
[    3.693382] Freeing unused kernel memory: 532k freed
[    3.693554] Write protecting the kernel text: 4128k
[    3.693618] Write protecting the kernel read-only data: 1532k
[    3.722247] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.972284] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[    3.972288] e100: Copyright(c) 1999-2006 Intel Corporation
[    3.972352] e100 0000:07:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    4.000148] e100 0000:07:08.0: PME# disabled
[    4.029671] e100: eth0: e100_probe: addr 0xdc105000, irq 20, MAC addr 00:a0:d1:42:95:0b
[    4.029715] ohci1394 0000:07:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.079595] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[dc106000-dc1067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    4.177026] usb 3-2: new low speed USB device using uhci_hcd and address 2
[    4.276546] PM: Starting manual resume from disk
[    4.276550] PM: Resume from partition 8:5
[    4.276552] PM: Checking hibernation image.
[    4.276874] PM: Resume from disk failed.
[    4.322505] kjournald starting.  Commit interval 5 seconds
[    4.322516] EXT3-fs: mounted filesystem with ordered data mode.
[    4.355282] usb 3-2: configuration #1 chosen from 1 choice
[    5.361174] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00080da0d142950b]
[   11.304051] usb 3-1: new full speed USB device using uhci_hcd and address 3
[   11.460282] usb 3-1: configuration #1 chosen from 1 choice
[   11.851813] Initializing USB Mass Storage driver...
[   11.852096] usb-storage: probe of 3-1:1.0 failed with error -5
[   11.852188] usb-storage: probe of 3-1:1.1 failed with error -5
[   11.854223] usb-storage: probe of 3-1:1.2 failed with error -1
[   11.854258] usbcore: registered new interface driver usb-storage
[   11.854264] USB Mass Storage support registered.
[   11.919971] udev: starting version 140
[   11.989587] USB Serial support registered for GSM modem (1-port)
[   11.989631] option 3-1:1.0: GSM modem (1-port) converter detected
[   11.989731] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
[   11.989743] option 3-1:1.1: GSM modem (1-port) converter detected
[   11.989796] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
[   11.989817] usbcore: registered new interface driver option
[   11.989820] option: v0.7.2:USB Driver for GSM modems
[   12.044191] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input5
[   12.066964] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   12.112087] cfg80211: Calling CRDA to update world regulatory domain
[   12.666105] cfg80211: World regulatory domain updated:
[   12.666109]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.666112]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.666115]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.666118]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.666121]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.666124]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.946564] sdhci: Secure Digital Host Controller Interface driver
[   12.946568] sdhci: Copyright(c) Pierre Ossman
[   12.948498] sdhci-pci 0000:07:06.3: SDHCI controller found [104c:803c] (rev 0)
[   12.948516] sdhci-pci 0000:07:06.3: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   12.948749] mmc0: SDHCI controller on PCI [0000:07:06.3] using DMA
[   12.990961] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   13.004894] intel_rng: FWH not detected
[   13.019728] usbcore: registered new interface driver hiddev
[   13.034602] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7
[   13.036459] generic-usb 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.1-2/input0
[   13.036483] usbcore: registered new interface driver usbhid
[   13.036508] usbhid: v2.6:USB HID core driver
[   13.133817] yenta_cardbus 0000:07:06.0: CardBus bridge found [1179:ff10]
[   13.133840] yenta_cardbus 0000:07:06.0: Enabling burst memory read transactions
[   13.133846] yenta_cardbus 0000:07:06.0: Using CSCINT to route CSC interrupts to PCI
[   13.133849] yenta_cardbus 0000:07:06.0: Routing CardBus interrupts to PCI
[   13.133856] yenta_cardbus 0000:07:06.0: TI: mfunc 0x01a01b22, devctl 0x66
[   13.148467] Linux agpgart interface v0.103
[   13.177767] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   13.293826] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[   13.293830] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[   13.293954] iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   13.293969] iwl3945 0000:05:00.0: setting latency timer to 64
[   13.294021] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[   13.294758] iwl3945 0000:05:00.0: irq 2299 for MSI/MSI-X
[   13.349164] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[   13.350093] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   13.358502] iTCO_vendor_support: vendor-support=0
[   13.366692] yenta_cardbus 0000:07:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
[   13.366697] yenta_cardbus 0000:07:06.0: Socket status: 30000006
[   13.366702] pci_bus 0000:07: Raising subordinate bus# of parent bus (#07) from #07 to #0b
[   13.366710] yenta_cardbus 0000:07:06.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[   13.366714] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
[   13.366963] yenta_cardbus 0000:07:06.0: pcmcia: parent PCI bridge Memory window: 0xdc100000 - 0xdc1fffff
[   13.366967] yenta_cardbus 0000:07:06.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[   13.367350] tifm_7xx1 0000:07:06.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   13.389878] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   13.390038] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[   13.390151] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.565770] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   13.565869] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.589733] hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
[   13.902528] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   13.904557] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   13.905375] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   13.906038] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   13.906880] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   14.075690] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
[   14.075697] synaptics: Toshiba Satellite A100 detected, limiting rate to 40pps.
[   14.098820] lp: driver loaded but no devices found
[   14.109281] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   14.240690] Adding 3020180k swap on /dev/sda5.  Priority:-1 extents:1 across:3020180k
[   14.257848] EXT3 FS on sda1, internal journal
[   14.825947] type=1505 audit(1239117855.631:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1925
[   14.883885] type=1505 audit(1239117855.686:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1929
[   14.884021] type=1505 audit(1239117855.690:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1929
[   14.884067] type=1505 audit(1239117855.690:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1929
[   14.884112] type=1505 audit(1239117855.690:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1929
[   15.036957] type=1505 audit(1239117855.839:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1934
[   15.037171] type=1505 audit(1239117855.843:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1934
[   15.151783] type=1505 audit(1239117855.954:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1938
[   15.453085] iwl3945: Radio Frequency Kill Switch is On:
[   15.453087] Kill switch must be turned off for wireless networking to work.
[   18.397253] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.397256] Bluetooth: BNEP filters: protocol multicast
[   18.428287] Bridge firewalling registered
[   19.000050] Clocksource tsc unstable (delta = -85408342 ns)
[   20.748215] pci 0000:01:00.0: power state changed by ACPI to D0
[   20.748233] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.056977] ppdev: user-space parallel port driver
[   21.270295] [drm] Initialized drm 1.1.0 20060810
[   21.325368] pci 0000:01:00.0: setting latency timer to 64
[   21.325672] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   22.760701] [drm] Setting GART location based on new memory map
[   22.762237] [drm] Loading R500 Microcode
[   22.762296] [drm] Num pipes: 1
[   22.762308] [drm] writeback test succeeded in 1 usecs
[   25.210102] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.210855] iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-1.ucode
[   25.302345] iwl3945: Radio disabled by HW RF Kill switch
[   43.802153] usb 3-2: USB disconnect, address 2
[   65.958654] PPP BSD Compression module registered
[   65.985962] PPP Deflate Compression module registered
[  137.288100] usb 3-2: new low speed USB device using uhci_hcd and address 4
[  137.463854] usb 3-2: configuration #1 chosen from 1 choice
[  137.491931] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input9
[  137.513147] generic-usb 0003:045E:00A4.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 1308.616186] usb 3-2: USB disconnect, address 4
[ 1350.552131] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 1350.824257] usb 1-6: configuration #1 chosen from 1 choice
[ 1351.036393] phy1 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[ 1351.036404] phy1 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 1351.036479] usbcore: registered new interface driver rt2500usb
[ 1351.323356] phy2: Selected rate control algorithm 'pid'
[ 1351.326032] Registered led device: rt73usb-phy2:radio
[ 1351.326065] Registered led device: rt73usb-phy2:assoc
[ 1351.326101] Registered led device: rt73usb-phy2:quality
[ 1351.326634] usbcore: registered new interface driver rt73usb
[ 1355.686184] rt73usb 1-6:1.0: firmware: requesting rt73.bin
[ 1355.923562] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 2076.298760] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 4958.986251] usb 1-6: USB disconnect, address 4
[ 4958.986571] phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[ 4958.986581] phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[ 4958.986589] phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[ 4958.986596] phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[ 4958.986604] phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 4958.986645] phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 4958.986834] phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 4958.986876] phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 4958.986920] phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 5853.168072] usb 1-6: new high speed USB device using ehci_hcd and address 5
[ 5853.439572] usb 1-6: configuration #1 chosen from 1 choice
[ 5853.549916] phy3 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[ 5853.549927] phy3 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 5853.822183] phy4: Selected rate control algorithm 'pid'
[ 5853.824690] Registered led device: rt73usb-phy4:radio
[ 5853.824725] Registered led device: rt73usb-phy4:assoc
[ 5853.824761] Registered led device: rt73usb-phy4:quality
[ 5857.687148] rt73usb 1-6:1.0: firmware: requesting rt73.bin
[ 5857.798703] ADDRCONF(NETDEV_UP): wlan1: link is not ready
Em q parte encontro o q me referis te ? abraço
 
Última edição pelo moderador:
Olá,

Como podes ver tens aí um problema:
Código: 
[ 1351.036393] phy1 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.

Parece a placa não é suportada (?) por este driver (ou existe ou erro algures).



Podes tentar várias soluções:

1. Utilizar o driver mais recente de http://rt2x00.serialmonkey.com/wiki/index.php/Main_Page

ver
http://rt2x00.serialmonkey.com/wiki/index.php/Help:Contents#rt2500_HOWTO.27s
e
http://rt2x00.serialmonkey.com/wiki/index.php/Downloads



2. Tentar com o driver da ralink (http://www.ralinktech.com/ralink/Home/Support/Linux.html)


3. Utilizar o ndiswrapper
 
É assim eu tenho a do portatil mas n esta a funcionar... n estara a criar confusao com esta ? é q ela aparece na mesma mas esta avariada a parte da recepçao... por isso comprei esta usb.
 
Hum como assim ? mas ja tentei em windows e td e a placa interna n funciona mesmo... ou tas t a referir q possa causar conflito ?
 
Como proceder ao make and make install no ubuntu ?

Para instalar, descompacte o driver, acesse a pasta "Module" dentro da plasta que será criada e rode os comandos "make" e "make install" (nesse driver você não precisa do "./configure"), como em:
# tar -zxvf rt73-cvs-daily.tar.gz
# cd rt73-cvs-2007101015/Module/
# make
# make install

Ja descompactei o file agr como faço o make e o make install ? obrigado.
 
make: *** No targets specified and no makefile found. Stop.

A duvida é mm esta... n consigo fazer o make nem make install. Descompactei o file fazendo extract file agr n consigo seguir estes comandos.
 
Pronto ja consegui sacar :) finalmente... agr aparece me o file tenho q o descompactar n ambiente de trabalho e dps como faço? deve ser o tal make e install q eu ainda n consegui fazer isso por incrivel q pareca :\
 
bows disse:
Pronto ja consegui sacar :) finalmente... agr aparece me o file tenho q o descompactar n ambiente de trabalho e dps como faço? deve ser o tal make e install q eu ainda n consegui fazer isso por incrivel q pareca :\
Clicar para expandir...

Extrais para o ambiente de trabalho... abres uma consola dentro dessa pasta e depois make e sudo make install

Atenção que no terminal tens que estar dentro da pasta!
 
Inicie sessão ou registe-se para poder participar.
Back
Topo