1. Este site usa cookies. Ao continuar a usar este site está a concordar com o nosso uso de cookies. Saber Mais.

[ajuda] Em relação a MB

Discussão em 'Dúvidas e Suporte Técnico PC' iniciada por amgc, 9 de Junho de 2008. (Respostas: 3; Visualizações: 434)

  1. amgc

    amgc Power Member

    Olá
    Gostava que me dessem alguma ajuda em relação a esta MB ou que dissessem o que devo ter em conta, antes de adquerir.
    Obrigado


    CPU

    1. Support for an Intel® CoreT 2 Extreme processor/ Intel® CoreT 2 Quad processor/Intel® CoreT 2 Duo processor/ Intel® Pentium® processor Extreme Edition/Intel® Pentium® D processor/ Intel® Pentium® 4 processor Extreme Edition/Intel® Pentium® 4 processor/ Intel® Celeron® processor in the LGA 775 package
    (Go to GIGABYTE's website for the latest CPU support list.)
    2. L2 cache varies with CPU
    3. 1600/1333/1066/800 MHz FSB

    Chipset

    1. North Bridge: Intel® X48 Chipset
    2. South Bridge: Intel® ICH9R

    Memory

    1. 4 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory
    2. Dual channel memory architecture
    3. Support for DDR2 1200/1066/800/667MHz, ECC, non ECC memory modules.

    Please refer "Memory Support List" for memory support information.
    Audio

    1. Realtek ALC889A codec
    2. High Definition Audio
    3. 2/4/5.1/7.1-channel
    4. Support for DTS (dts NEO:PC)
    5. Support for S/PDIF In/Out
    6. Support for CD In

    LAN

    1. Realtek 8111C chip (10/100/1000 *****)

    Expansion Slots

    1. 2 x PCI Express x16 slots (The PCIE_16_1 slot supports x16; the PCIE_16_2 supports x4.)
    2. 3 x PCI Express x1 slots (share with the PCIE_16_2 slot)
    3. 2 x PCI slots

    Storage Interface South Bridge:

    1. 6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices
    2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10

    GIGABYTE SATA2 chip:

    1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
    2. 2 x SATA 3Gb/s connectors (GSATAIIA, GSATAIIB) supporting up to 2 SATA 3Gb/s devices
    3. Support for SATA RAID 0, RAID 1, and JBOD

    iTE IT8718 chip:

    1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive

    IEEE 1394

    1. T.I. TSB43AB23 chip
    2. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394 bracket connected to the internal IEEE 1394 header)

    USB

    1. Integrated in the South Bridge
    2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)

    Internal I/O Connectors

    1. 1 x 24-pin ATX main power connector
    2. 1 x 8-pin ATX 12V power connector
    3. 1 x 4-pin PCIe 12V power connector
    4. 1 x floppy disk drive connector
    5. 1 x IDE connector
    6. 8 x SATA 3Gb/s connectors
    7. 1 x CPU fan header
    8. 2 x system fan headers
    9. 1 x power fan header
    10. 1 x North Bridge fan header
    11. 1 x front panel header
    12. 1 x front panel audio header
    13. 1 x CD In connector
    14. 1 x S/PDIF In header
    15. 1 x S/PDIF Out header
    16. 2 x USB 2.0/1.1 headers
    17. 1 x IEEE 1394a header
    18. 1 x parallel port header
    19. 1 x serial port header
    20. 1 x power LED header
    21. 1 x chassis intrusion header

    Back Panel Connectors

    1. 1 x PS/2 keyboard port
    2. 1 x PS/2 mouse port
    3. 1 x coaxial S/PDIF Out connector
    4. 1 x optical S/PDIF Out connector
    5. 8 x USB 2.0/1.1 ports
    6. 2 x IEEE 1394a ports
    7. 2 x RJ-45 port
    8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)

    I/O Controller

    1. iTE IT8718 chip

    H/W Monitoring

    1. System voltage detection
    2. CPU/System temperature detection
    3. CPU/System/Power fan speed detection
    4. CPU overheating warning
    5. CPU/System/Power fan fail warning
    6. CPU fan speed control

    BIOS

    1. Supports QuadBIOS
    2. 2 x 8 ***** flash ROM
    3. Use of licensed AWARD BIOS
    4. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b.

    Unique Features

    1. Support for Dynamic Energy Saver
    2. Support for @BIOS
    3. Support for Download Center
    4. Support for Q-Flash
    5. Support for EasyTune
    6. Support for Xpress Install
    7. Support for Xpress Recovery2

    Overclocking Voltage adjustments in BIOS Setup (CPU/DDR2/PCIe/FSB/(G)MCH) Allow you to:

    1. Increase CPU voltage
    2. Increase DDR2 voltage by 0.05V to 1.55V with 0.05V increment
    3. Increase PCIe voltage by 0.05V to 0.35V with 0.05V increment
    4. Increase FSB voltage by 0.05V to 0.35V with 0.05V increment
    5. Increase (G)MCH voltage by 0.025V to 0.375V with 0.025V increment

    Frequency adjustments in BIOS Setup (CPU/DDR2/PCIe) allow you to:

    1. Adjust CPU host frequency from 100 MHz to 700 MHz with 1 MHz increment
    2. Adjust DDR2 frequency
    3. Adjust PCI Express x16 frequency from 90 MHz to 150 MHz with 1 MHz increment

    Form Factor

    1. ATX Form Factor; 30.5cm x 24.4cm

    Remark

    1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
    2. Due to most hardware/software vendors no longer offer support for Win9X/ME. If some vendors still has Win9X/ME drivers available, we will publish on website.
    3. Duo to chipset limitation, Intel ICH9R RAID driver does not support Windows 2000 operating system.
     
    Última edição: 9 de Junho de 2008
  2. Echuu

    Echuu Power Member

    Eu posso estar visolho (não é pouco provável, diga-se), mas não encontrei o modelo da motherboard no teu post... É suposto adivinharmos a partir das características?
    Já agora, que usas é que tencionas dar o PC, e que outros componentes planeias instalar?
     
  3. rustyballzz

    rustyballzz Power Member

    deve ser GIGABYTE GA-X48-DQ6
    nao é mazinha nao sr.
     
  4. Saguim

    Saguim Power Member

    Grande board sim senhor, mas tenho que concordar com o Echuu, depende da utlização, o que queres fazer com o PC, e o que mais vais lá por?
     

Partilhar esta Página