análise ao meu overclock

[devil_93]

boas pessoal, cria-vos mostrar e tambem receber ideias e dicas para melhorar o meu oc..
segue a minha configuraçao:

Proc : Intel core2duo E8400 rev.C0 3.0GHz @ 3.6GHz
Motherboard : Asus P5Q3
RAM: 2 chips Kingston HyperX 3GB DDR3 1600MHZ
Grafica: XFX Geforce 9600GT 256bits 670/1675/900 @ 800/2000/950
Fonte: Corsair TX650W
Som: Creative sound Blaster X-Fi Extreme Audio
Caixa: NOX CoolBay Side Window Black

segue as configs na bios:

ai overclock tuner : manual
cpu ratio setting : 9.0
Fsb frequency : 400
Pcie frequency : 100
Fsb stap to north bridge : auto
dram frequency : DDR3-1334MHz
dram clk skew on channel A1 : auto
dram clk skew on channel A2 : auto
dram clk skew on channel B1 : auto
dram clk skew on channel B2 : auto
Dram timing control : manual
cas# latency : 9
dram ras# to cas# delay : 9
dram ras# precharge : 9
dram ras# activate to precha : 24
ras# to ras# delay : auto
row refresh cycle time : auto

dram static read control : disabled
dram dynamic write control : disabled
dram read training : disabled
dram write training : disabled

mem. oc charger : enabled
ai clock twister : auto
ai transaction booster : auto
cpu voltage : 1.35000
cpu gtl reference : auto
cpu pll voltage : auto
fsb termination voltage : auto
dram voltage : auto
nb voltage : auto
sb voltage : auto
pcie sata voltage : auto

load line calibration : enabled
cpu spread spectrum : disabled
pcie spread spectrum : disabled
cpu clock skew : auto
cpu margin enhancement : optimazed

cpu ratio setting : 09.0
c1e support : enabled
max cpuid value limit : disabled
intel virtualization tech : enabled
cpu tm function : disabled
execute disabled bit : enabled

segue o link com a imagem a mostrar tambem no everest e no cpu-z:

http://imageshack.us/a/img213/9618/73810220.png

aguardo opinioes e se tiver algo a ajustar ou a melhorar digam, pois tambem agradeço

bgd

 

[nismonuno]

na minha asus p5q pro com o 8400 tinha assim

Ai Overclock Tuner ................. [Manual]
CPU Ratio Setting .................. [9.0]
FSB Frequency ...................... [450]
PCIE Frequency ..................... [101]
FSB Strap to North Bridge .......... [Auto]
DRAM Frequency ..................... [1191mhz]
DRAM Clock Skew on Channel A1 ...... [Auto]
DRAM Clock Skew on Channel A2 ...... [Auto]
DRAM Clock Skew on Channel B1 ...... [Auto]
DRAM Clock Skew on Channel B2 ...... [Auto]


DRAM Timing Control: Manual
1st
CAS# Latency : 6
RAS# to CAS# Delay : 6
RAS# Precharge : 6
RAS# ActivateTime : 18
RAS# to RAS# Delay : Auto
Row Refresh Cycle Time : Auto
Write Recovery Time : Auto
Read to Precharge Time : Auto

2nd
Read to Write Delay (S/D) : Auto
Write to Read Delay (S) : Auto
Write to Read Delay (D) : Auto
Read to Read Delay (S) : Auto
Read to Read Delay (D) : Auto
Write to Write Delay (S) : Auto
Write to Write Delay (D) : Auto

3rd
Write to Pre Delay : Auto
Reado to Pre Delay : Auto
Pre to Pre Delay : Auto
All Pre to Act Delay : Auto
All Pre to Ref Delay : Auto

DRAM Static Read Control ........... [Disable]
DRAM Read Training ................. [Disable]
MEM. OC Charger .................... [Enable]
Ai Clock Twister ................... [Auto]
Ai Transaction Booster ............. [Auto]
____________________________________

CPU Voltage ........................ [1.325v]
CPU GTL Voltage Reference (0/2) .... [Auto]
CPU GTL Voltage Reference (1/3) .... [Auto]
CPU PLL Voltage .................... [1.52]
FSB Termination Voltage............. [1.26]
DRAM Voltage ....................... [2.0]
NB Voltage ......................... [1.24]
NB GTL Reference ................... [Auto]
SB Voltage ......................... [1.10]
PCIE SATA Voltage .................. [1.5]
____________________________________

Load-Line Calibration .............. [Enable]
CPU Spread Spectrum ................ [Disable]
PCIE Spread Spectrum ............... [Disable]
CPU Clock Skew ..................... [Auto]
NB Clock Skew ...................... [Auto]
CPU Margin Enhancement ............. [Optimized]