Viva malta,
Tenho aqui um Cisco 800 que não arranca (está em loop) e gostava de saber se me conseguem ajudar a descobrir o que se passa.
Segue o log do que consigo ver:
System Bootstrap, Version 12.3(8r)YI2, RELEASE SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2005 by cisco Systems, Inc.
C870 series (Board ID: 3-148) platform with 262144 Kbytes of main memory
Booting flash:c870-adventerprisek9-mz.151-0.26.T0.4
Self decompressing the image : ##################################################################################################################### [OK]
Restricted Rights Legend
...
Cisco IOS Software, C870 Software (C870-ADVENTERPRISEK9-M), Version 15.1(0.26)T0.4, INTERIM SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 02-Mar-10 07:19 by khuie
Installed image archive
...
WARNING: For the c87x family, the ADVENTERPRISEK9 FEATURE set is supported only on the c876.
%Software-forced reload
00:00:53 UTC Mon Mar 1 1993: Unexpected exception to CPU: vector 700, PC = 0x803C7334, LR = 0x803C72F8
-Traceback= 0x803C7334z 0x803C72F8z 0x80A5920Cz 0x80A5941Cz 0x803C951Cz 0x803B0560z
CPU Register Context:
MSR = 0x00029032 CR = 0x24002082 CTR = 0x803B7AB4 XER = 0x00000000
R0 = 0x803C72F8 R1 = 0x84314B70 R2 = 0xFFF4FFF4 R3 = 0x83B9446C
R4 = 0x00000000 R5 = 0x00000000 R6 = 0x00000000 R7 = 0x00000001
R8 = 0x00000000 R9 = 0x83AE0000 R10 = 0x83AE0000 R11 = 0x00000000
R12 = 0x48002088 R13 = 0x8FFFFF30 R14 = 0x80A593B0 R15 = 0x00000000
R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000
R24 = 0x00000000 R25 = 0x00000000 R26 = 0x83AE0000 R27 = 0x00000000
R28 = 0x82B60000 R29 = 0x83D611A0 R30 = 0x835E0000 R31 = 0x00000000
------------------ show chunk failures ------------------
=== Flushing messages (00:00:55 UTC Mon Mar 1 1993) ===
Queued messages:
*Mar 1 00:00:55.204: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Mar 1 00:00:02.820: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Mar 1 00:00:15.263: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Mar 1 00:00:16.095: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Mar 1 00:00:16.859: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:16.859: %LINK-3-UPDOWN: Interface FastEthernet4, changed state to up
*Mar 1 00:00:17.884: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:17.884: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet4, changed state to up
*Mar 1 00:00:20.112: USB init complete.
*Mar 1 00:00:25.781: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet4, changed state to down
*Mar 1 00:00:54.752: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to downCPU Register Context:
VEC = 0x00000700 PC = 0x803C7334 MSR = 0x00029032 CR = 0x24002082
LR = 0x803C72F8 CTR = 0x803B7AB4 XER = 0x00000000
R0 = 0x803C72F8 R1 = 0x84314B70 R2 = 0xFFF4FFF4 R3 = 0x83B9446C
R4 = 0x00000000 R5 = 0x00000000 R6 = 0x00000000 R7 = 0x00000001
R8 = 0x00000000 R9 = 0x83AE0000 R10 = 0x83AE0000 R11 = 0x00000000
R12 = 0x48002088 R13 = 0x8FFFFF30 R14 = 0x80A593B0 R15 = 0x00000000
R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000
R24 = 0x00000000 R25 = 0x00000000 R26 = 0x83AE0000 R27 = 0x00000000
R28 = 0x82B60000 R29 = 0x83D611A0 R30 = 0x835E0000 R31 = 0x00000000
DEC = 0x7FFF8E6C TBU = 0x00000000 TBL = 0x39111004 PVR = 0x80822014
DAR = 0x00000000 DSISR = 0x000000ÿ
*** System received a Software forced crash ***
signal= 0x17, code= 0x700, context= 0x83b3a0a0
PC = 0x803c7334, Vector = 0x700, SP = 0x84314b70
Obrigado!
Tenho aqui um Cisco 800 que não arranca (está em loop) e gostava de saber se me conseguem ajudar a descobrir o que se passa.
Segue o log do que consigo ver:
System Bootstrap, Version 12.3(8r)YI2, RELEASE SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2005 by cisco Systems, Inc.
C870 series (Board ID: 3-148) platform with 262144 Kbytes of main memory
Booting flash:c870-adventerprisek9-mz.151-0.26.T0.4
Self decompressing the image : ##################################################################################################################### [OK]
Restricted Rights Legend
...
Cisco IOS Software, C870 Software (C870-ADVENTERPRISEK9-M), Version 15.1(0.26)T0.4, INTERIM SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 02-Mar-10 07:19 by khuie
Installed image archive
...
WARNING: For the c87x family, the ADVENTERPRISEK9 FEATURE set is supported only on the c876.
%Software-forced reload
00:00:53 UTC Mon Mar 1 1993: Unexpected exception to CPU: vector 700, PC = 0x803C7334, LR = 0x803C72F8
-Traceback= 0x803C7334z 0x803C72F8z 0x80A5920Cz 0x80A5941Cz 0x803C951Cz 0x803B0560z
CPU Register Context:
MSR = 0x00029032 CR = 0x24002082 CTR = 0x803B7AB4 XER = 0x00000000
R0 = 0x803C72F8 R1 = 0x84314B70 R2 = 0xFFF4FFF4 R3 = 0x83B9446C
R4 = 0x00000000 R5 = 0x00000000 R6 = 0x00000000 R7 = 0x00000001
R8 = 0x00000000 R9 = 0x83AE0000 R10 = 0x83AE0000 R11 = 0x00000000
R12 = 0x48002088 R13 = 0x8FFFFF30 R14 = 0x80A593B0 R15 = 0x00000000
R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000
R24 = 0x00000000 R25 = 0x00000000 R26 = 0x83AE0000 R27 = 0x00000000
R28 = 0x82B60000 R29 = 0x83D611A0 R30 = 0x835E0000 R31 = 0x00000000
------------------ show chunk failures ------------------
=== Flushing messages (00:00:55 UTC Mon Mar 1 1993) ===
Queued messages:
*Mar 1 00:00:55.204: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Mar 1 00:00:02.820: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Mar 1 00:00:15.263: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Mar 1 00:00:16.095: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Mar 1 00:00:16.859: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:16.859: %LINK-3-UPDOWN: Interface FastEthernet4, changed state to up
*Mar 1 00:00:17.884: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:17.884: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet4, changed state to up
*Mar 1 00:00:20.112: USB init complete.
*Mar 1 00:00:25.781: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet4, changed state to down
*Mar 1 00:00:54.752: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to downCPU Register Context:
VEC = 0x00000700 PC = 0x803C7334 MSR = 0x00029032 CR = 0x24002082
LR = 0x803C72F8 CTR = 0x803B7AB4 XER = 0x00000000
R0 = 0x803C72F8 R1 = 0x84314B70 R2 = 0xFFF4FFF4 R3 = 0x83B9446C
R4 = 0x00000000 R5 = 0x00000000 R6 = 0x00000000 R7 = 0x00000001
R8 = 0x00000000 R9 = 0x83AE0000 R10 = 0x83AE0000 R11 = 0x00000000
R12 = 0x48002088 R13 = 0x8FFFFF30 R14 = 0x80A593B0 R15 = 0x00000000
R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000
R24 = 0x00000000 R25 = 0x00000000 R26 = 0x83AE0000 R27 = 0x00000000
R28 = 0x82B60000 R29 = 0x83D611A0 R30 = 0x835E0000 R31 = 0x00000000
DEC = 0x7FFF8E6C TBU = 0x00000000 TBL = 0x39111004 PVR = 0x80822014
DAR = 0x00000000 DSISR = 0x000000ÿ
*** System received a Software forced crash ***
signal= 0x17, code= 0x700, context= 0x83b3a0a0
PC = 0x803c7334, Vector = 0x700, SP = 0x84314b70
Obrigado!