APLinhares
OpenSource
Bem, tenho aqui 1 Seagate 7200.7 que agora anda sempre a reiniciar-se. Sinal de morte nao ?
faz um beep constantemente, e claro, se tento aceder o sistema pára...
faz um beep constantemente, e claro, se tento aceder o sistema pára...
Código:
smartctl --all /dev/hda
smartctl version 5.37 [x86_64-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST380011A
Serial Number: 3JV66H12
Firmware Version: 3.06
User Capacity: 80,026,361,856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Sun Oct 7 01:17:14 2007 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 070 062 006 Pre-fail Always - 96738735
3 Spin_Up_Time 0x0003 099 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 206
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 378626351
9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 12169
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2955
194 Temperature_Celsius 0x0022 031 046 000 Old_age Always - 31
195 Hardware_ECC_Recovered 0x001a 070 061 000 Old_age Always - 96738735
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 189 000 Old_age Always - 109
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
Código:
smartctl -l error /dev/hda
smartctl version 5.37 [x86_64-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 82 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 82 occurred at disk power-on lifetime: 12163 hours (506 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 c6 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x000000c6 = 198
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 5e 69 00 00 e0 00 05:20:30.989 READ DMA EXT
25 00 5e 69 00 00 e0 00 05:20:30.988 READ DMA EXT
10 00 3f 00 00 00 e0 00 05:20:30.962 RECALIBRATE [OBS-4]
25 00 5e 69 00 00 e0 00 05:20:30.962 READ DMA EXT
25 00 5e 69 00 00 e0 00 05:20:30.961 READ DMA EXT
Error 81 occurred at disk power-on lifetime: 12163 hours (506 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 c6 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x000000c6 = 198
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 5e 69 00 00 e0 00 05:20:30.989 READ DMA EXT
10 00 3f 00 00 00 e0 00 05:20:30.988 RECALIBRATE [OBS-4]
25 00 5e 69 00 00 e0 00 05:20:30.962 READ DMA EXT
25 00 5e 69 00 00 e0 00 05:20:30.962 READ DMA EXT
25 00 02 67 00 00 e0 00 05:20:30.961 READ DMA EXT
Error 80 occurred at disk power-on lifetime: 12163 hours (506 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 c6 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x000000c6 = 198
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 5e 69 00 00 e0 00 05:20:30.989 READ DMA EXT
25 00 5e 69 00 00 e0 00 05:20:30.988 READ DMA EXT
25 00 02 67 00 00 e0 00 05:20:30.962 READ DMA EXT
25 00 1e 49 00 00 e0 00 05:20:30.962 READ DMA EXT
25 00 02 47 00 00 e0 00 05:20:30.961 READ DMA EXT
Error 79 occurred at disk power-on lifetime: 12163 hours (506 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 c6 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x000000c6 = 198
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 5e 69 00 00 e0 00 05:20:30.989 READ DMA EXT
25 00 02 67 00 00 e0 00 05:20:30.988 READ DMA EXT
25 00 1e 49 00 00 e0 00 05:20:30.962 READ DMA EXT
25 00 02 47 00 00 e0 00 05:20:30.962 READ DMA EXT
25 00 06 41 00 00 e0 00 05:20:30.961 READ DMA EXT
Error 78 occurred at disk power-on lifetime: 12163 hours (506 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 06 84 31 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00318406 = 3245062
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 06 01 84 31 e0 00 05:20:28.327 READ DMA EXT
25 00 06 01 84 31 e0 00 05:20:27.553 READ DMA EXT
10 00 3f 00 00 00 e0 00 05:20:27.553 RECALIBRATE [OBS-4]
25 00 06 01 84 31 e0 00 05:20:27.550 READ DMA EXT
25 00 06 01 84 31 e0 00 05:20:27.539 READ DMA EXT
Última edição:
