Erro na instalação do Windows 10

GiiB_10

Membro
Boa noite, precisava da vossa ajuda com um problema de instalação do Windows 10.

Comprei recentemente o seguinte PC, que acabei de montar ontem. Mas entretanto, tem sido impossível instalar o Windows.
Estou a tentar fazer a instalação através de uma pen, aparece-me o ecrã preto para escolher a versão de 64 ou 32 bits. Escolho uma, e fica a imagem bloqueada no logo do Windows, e não passa dali.
Já alterei as definições da RAM (que por predefinição está a 2133mhz), e agora nem imagem dá.

Ficam as specs:
Placa Gráfica -
RTX 3080
Processador - AMD Ryzen 5 5600X
Motherboard - MSI MPG B550 Gaming Plus
SSD - M.2 2280 Western Digital Blue SN550 1TB 3D NAND NVMe
Disco Rígido - 3.5" Western Digital Blue 2TB 5400RPM 64MB SATA III
Memória RAM -G.SKILL Ripjaws V 16GB (2x8GB) DDR4-3600MHz CL16 Preta

Se alguém me conseguir ajudar, agradecia.
 
"1. There should be no other drives connected to the computer at install time.
Plug in only the USB install media, and your SSD whether its M2 or sata. No other drives.

2. Turn on PC, press on F11 a few times until the boot menu appears.
Select the USB drive, UEFI mode.

3. When you get to the Windows Installer drive selection screen, delete (remove)
all existing partitions so that the drive is one big chunk of Unallocated Space.

4. Highlight the unallocated space and tell windows to begin installation.

5. If necessary, make sure you have an ethernet cable connecting you to the internet so Windows 10 can
do its thing and update the install process.

6. If necessary, on another computer, run the Media Creation tool and re-download a fresh Windows 10 install media.
(You'll get the latest build this way.)"

https://forum-en.msi.com/index.php?...-or-after-windows-install.345141/post-1997472
 
"1. There should be no other drives connected to the computer at install time.
Plug in only the USB install media, and your SSD whether its M2 or sata. No other drives.

2. Turn on PC, press on F11 a few times until the boot menu appears.
Select the USB drive, UEFI mode.

3. When you get to the Windows Installer drive selection screen, delete (remove)
all existing partitions so that the drive is one big chunk of Unallocated Space.

4. Highlight the unallocated space and tell windows to begin installation.

5. If necessary, make sure you have an ethernet cable connecting you to the internet so Windows 10 can
do its thing and update the install process.

6. If necessary, on another computer, run the Media Creation tool and re-download a fresh Windows 10 install media.
(You'll get the latest build this way.)"

https://forum-en.msi.com/index.php?...-or-after-windows-install.345141/post-1997472
Também já tentei essa solução.
E não deu resultado.
Algo mais que possa tentar?
É que agora nem à Bios consigo ir, que não me dá imagem. E já removi a pilha da board.
 
Fizeste a actualização da BIOS necessária ao teu processador, caso não seja compatível com o mesmo 'out of the box'?

https://download.msi.com/archive/mnu_exe/mb/E7C56v1.1.pdf

A partir da página 45.

"Updating BIOS with Flash BIOS Button"

Não precisas de um 3000, podes fazer o update sem processador.
Isso ainda não fiz. Quando chegar a casa vou experimentar e dou feedback!
Muito obrigado pela disponibilidade Manuel!

Já agora, alguma ideia para o facto de agora não ter imagem, desde que alterei a frequência da RAM? E a solução, para além de remover a pilha?
 
Tira a pilha por uns 30 minutos, com o PC desligado da tomada, deve dar!!!

EDIT: Não precisas do monitor para actualizar a BIOS com o método que te disse!!! E não te esqueças, update sem processador!!! Também se pode dar o caso da board já vir com a BIOS actualizada, mas não perdes nada em tentar:

"1. Please download the latest BIOS file that matches your motherboard model from the MSI® website.
2. Rename the BIOS file to MSI.ROM, and save it to the root of your USB flash drive.
3. Connect the power supply to CPU_PWR1 and ATX_PWR1. (No need to install CPU and memory.)
4. Plug the USB flash drive that contains the MSI.ROM file into the Flash BIOS Porton the rear I/O panel.
5. Press the Flash BIOS Button to flash BIOS, and the LED starts flashing.
6. The LED will be turned off when the process is completed."


Se não der, vamos dar uma vista de olhos às memórias!!!
 
Última edição:
Back
Topo