1. Este site usa cookies. Ao continuar a usar este site está a concordar com o nosso uso de cookies. Saber Mais.
  2. Informação: Pela 0:30 desta Sexta-feira (9 de Dezembro, 23:30 de Quinta-feira nos Açores) o Fórum e restantes sites da ZWAME vão estar offline para manutenção durante cerca de 1h30.
    Se necessário faremos actualizações via Twitter e Facebook.
    Remover anúncio

Huawei E220 USB Modem

Discussão em 'Dúvidas e Suporte Técnico PC' iniciada por firetiger, 1 de Dezembro de 2006. (Respostas: 5; Visualizações: 5286)

  1. firetiger

    firetiger Power Member

    Olá pessoal é o seguinte ando a explorar o windows vista só para ter net tenho de ter as drivers da placa kanguru a placa é a [SIZE=-1]Huawei E220 USB Modem.
    Alguém sabe onde posso obter as drivers?
    Já alguém consegui ter internet no vista com esta placa?
    [/SIZE]
     
  2. firetiger

    firetiger Power Member

    sim.......................
     
  3. rabreu

    rabreu Power Member

    Acho q ainda n há solução para isso. Só mmo qd o fabricante disponibilizar os drivers....
     
  4. huawei e220 TRICK

    :victory:
    * Huawei E220 (web´n´walk Version Austria T-Mobile) - recognized as CDFS (?!) but can´t read from, no driver installed...
    incompatible -> see Vista HCL :-(

    Work-Around: You need another PC/Laptop and a USB Pen/Key Drive to do this:
    1) Connect the E220 to your XP PC/Laptop
    2) access the emulated CD Drive and copy all the Contents onto a USB Pen Drive.
    3) Disconnect the E220 and the Pen Drive
    4) Connect the Pen Drive to your Vista PC and install the software using the Autorun.exe file (Run as Administrator)
    5) Connect the E220 - Vista will only recognize a USB Mass Storage Device and the emulated CD drive which it cannot access.
    6) Open the Device Manager (in the Control Panel)
    7) Look for the USB Mass Storage Device in the "Universal Serial Bus controllers" Section

    If there are more than one USB Mass Storage Devices, right click each one,
    select Properties, Details and then "Children"
    If it says "Huawei" somewhere inside the Value, you found the right one.

    8) Right click on the Mass Storage Device and select "Update Driver Software"
    9) Select "Browse my Computer"
    10) Select "Let me pick"
    11) Uncheck "Show compatible devices"
    12) Select "(Generic USB Host Controller)" in the Manufacturer Tab
    13) Select "USB Composite Device" in the Model Tab
    14) Finish installing the Composite Device driver
    15) Afterwards, Vista will add another USB Mass Storage Device, and if you are lucky, also 2 "Data Interfaces"
    16) If it doesn't detect the Data Interfaces, disconnect and reconnect your E220.
    17) Vista should now detect all the E220s Data Interfaces
    18) When asked to insert the disk containing the drivers, choose "I don't have the disk"
    19) Enter the \Drivers\WinXP Subfolder of your USB Pen Drive
    20) Repeat Step 18&19 for the second Data Interface
    21) Start your Huawei Mobile Connect (Web'n'Walk Manager) Software, and connect :)

    This has worked for me 3 times, I hope it does so for you, too!
    Note: This does NOT fix the Problem concerning the corrupt emulated CD-ROM Drive!
     
  5. Ha solução

    Claro que a solução para este problema.não percisas de ir ao site do fabricante mas sim ao site da operadora.por aquilo que conheco na kanguru ha um firmware proprio para o vista e esta disponivel no site.
     

Partilhar esta Página