iJFerreira
Banido
qual é o melhor programa para diagnosticar e testar
memorias? queria algo mais completo que o sandra.
obrigado
memorias? queria algo mais completo que o sandra.
obrigado
Originally posted by HaTrED
Hot CPU tester...
Memory Type: DDR SDRAM
Error Correction: NONE
Voltage Interface Level: SSTL (2.5V)
Data Width: 64 bits
Number of Physical Banks: 1 (single sided)
Number of Logical Banks: 4
Number of Row Addresses: 13
Number of Col Addresses: 10
Bank Density: 256 MB
Primary Ram Width: 8 bits
Error Checking Ram Width: d bits
Module Density: 256 MB
Refresh Rate: 7812.500 us
Self-Refresh: Yes
Burst Lengths Supported: 2 4 8
CAS 2.0:
Cycle Time (tCYC) = 6.000 ns fMax = 166.667 Mhz
Access Time (tAC) = 0.700 ns fMax = 1428.571 MHz
CAS 2.5:
Cycle Time (tCYC) = 6.000 ns fMax = 166.667 Mhz
Access Time (tAC) = 0.700 ns fMax = 1428.571 MHz
CS Supported: 0.0 clocks
WE Supported: 1.0 clocks
Min Delay, Bk/Bk Random Cols: 1 clocks
Min Row Precharge Time (tRP): 18.000 ns
Min Row Active delay (tRRD): 12.000 ns
Min RAS to CAS delay (tRCD): 18.000 ns
Min Actv to Precharge (tRAS): 42.000 ns
Addr/Cmd Setup Time: 0.800 ns
Addr/Cmd Hold Time: 0.800 ns
Data Setup Time: 0.450 ns
Data Hold Time: 0.450 ns
Buffered Address & Control No
Registered Address & Control No
On-Card PLL: No
FET Switch On-Card Enable: No
FET Switch External Enable: No
Differential Clock Input: Yes
Includes Weak Driver: No
Includes QFC Output: No
Lower Vdd Tolerence: 0.2 V
Upper Vdd Tolerence: 0.2 V
Manufacturer's JEDEC ID Code: 00000000 009e7f7f
Module Manufacturing Location: 1 (manufacture dependant)
Module Part Number: CMX256A-3200C2
Module Revision Code: 0 (manufacture dependant)
Module Manufacturing Date: Not reported
Module Serial Number: 00000000
SPD Revision: 0.0
Originally posted by Madril
Nas minhas aparece k são as 2 3500 :S
mas em principio na faz diferença
Testa lá isso e mostra resultados
Originally posted by XiMaBaRa
ele ker de memorias... axo k isso eh só po CPU... si tiver errado corrigam-me
cumps!
Originally posted by HaTrED
Então vê lá o programa 1º e depois diz-me qualquer coisa ok? Podes fazer burn-in às mem's bem como correr loops de teste à mem!
Prog: Hot CPU tester PRO!
Mania de falar sem conhecimento de causa !
inté!