Nop. Para já nada. Mas tb tenho tido pouco tempo para ver tv.... E tu?
Info sobre Philips 42PFL5603D
- Autor do tópico XiriX
- Data Início
Nop. Para já nada. Mas tb tenho tido pouco tempo para ver tv.... E tu?
Feiticeiro
Power Member
Nada também. Talvez sejam correcções de bugs pouco significantes.
Purex
Power Member
a lista ainda é grandita...
To include the 8-Day Electronic Program Guide (EPG) for country, Spain.
• Audio drop-out and/or noise heard when connected to certain Home Theater System through SPDIF
connection.
• Random signal lost for 1-2 seconds when viewing HD digital channels or 1080i video content through
HDMI connection.
• “MPEG artifact Reduction” mode is reset to OFF mode in AV mode.
• Not able to tune to analogue channel(s) with frequency above 800MHz.
• Cannot view pay channels/services with maturity rating from service provider LA7.
• Missing digital channels after channel installation and/or loosing signal after the TV changes the channel.
(Only applicable to country, Spain)
• TV does not respond to the remote control or the local control buttons after the TV wake-up from standby
on the next day. (Applicable for countries with only analogue transmission.)
• No audio from the TV when the Humax Set-Top-Box is connected through the HDMI connection.
• Half teletext page was displayed occasionally.
• Previously stored digital channels were deleted after TV performs installation update.
• Contrast variation seen on the screen when sudden change in picture brightness level when Dynamic
contrast feature is switched OFF.
• Increase the audio bass preset level.
• In Norway, when the TV performs channel installation in antenna mode, the Swedish channels are
arranged before the Norway channels, which are shown in the channel list.
• The TV cannot change the maturity rating for channels/services from ‘YouSee’ Denmark.
• Analogue channels are noisy when the TV changes the channel from Digital to Analogue.
• OPTION key to enlarge teletext page has been replaced with the picture format key.
• DVB-C introduction for Sweden and Denmark.
• No scheduled TV programs are displayed on the EPG (Electronic Program Guide).
• Only one channel is stored when performing manual installation in cable.
• The audio does not change when the audio language is changed from English to French for a digital
channel.
• ‘No Program Available’ displayed on the screen when viewing pay channels/services.
• TV restarts when switching between pay channels/services.
• TV restarts during first time/virgin mode installation.
• TV restarts while navigating through the song list in the content browser.
• Garbage characters seen on the EPG (Electronic Program Guide) screen.
• Solved channels not viewable from Canal+ decoder in France for customers who are previously on
software version 64.40.0.
• TV cannot recognize the Niagra CAM card in Switzerland.
• TV restarts auto-installation again when TV completed auto-installation without antenna connection.
• Picture is vertically stretched in DVB-T channels.
• To resolve DVBT channels on Bitche cable in France not being able to be stored.
• After channel installation, 1 DVB-T channel is found missing in Brandenburg, Germany
To include the 8-Day Electronic Program Guide (EPG) for country, Spain.
• Audio drop-out and/or noise heard when connected to certain Home Theater System through SPDIF
connection.
• Random signal lost for 1-2 seconds when viewing HD digital channels or 1080i video content through
HDMI connection.
• “MPEG artifact Reduction” mode is reset to OFF mode in AV mode.
• Not able to tune to analogue channel(s) with frequency above 800MHz.
• Cannot view pay channels/services with maturity rating from service provider LA7.
• Missing digital channels after channel installation and/or loosing signal after the TV changes the channel.
(Only applicable to country, Spain)
• TV does not respond to the remote control or the local control buttons after the TV wake-up from standby
on the next day. (Applicable for countries with only analogue transmission.)
• No audio from the TV when the Humax Set-Top-Box is connected through the HDMI connection.
• Half teletext page was displayed occasionally.
• Previously stored digital channels were deleted after TV performs installation update.
• Contrast variation seen on the screen when sudden change in picture brightness level when Dynamic
contrast feature is switched OFF.
• Increase the audio bass preset level.
• In Norway, when the TV performs channel installation in antenna mode, the Swedish channels are
arranged before the Norway channels, which are shown in the channel list.
• The TV cannot change the maturity rating for channels/services from ‘YouSee’ Denmark.
• Analogue channels are noisy when the TV changes the channel from Digital to Analogue.
• OPTION key to enlarge teletext page has been replaced with the picture format key.
• DVB-C introduction for Sweden and Denmark.
• No scheduled TV programs are displayed on the EPG (Electronic Program Guide).
• Only one channel is stored when performing manual installation in cable.
• The audio does not change when the audio language is changed from English to French for a digital
channel.
• ‘No Program Available’ displayed on the screen when viewing pay channels/services.
• TV restarts when switching between pay channels/services.
• TV restarts during first time/virgin mode installation.
• TV restarts while navigating through the song list in the content browser.
• Garbage characters seen on the EPG (Electronic Program Guide) screen.
• Solved channels not viewable from Canal+ decoder in France for customers who are previously on
software version 64.40.0.
• TV cannot recognize the Niagra CAM card in Switzerland.
• TV restarts auto-installation again when TV completed auto-installation without antenna connection.
• Picture is vertically stretched in DVB-T channels.
• To resolve DVBT channels on Bitche cable in France not being able to be stored.
• After channel installation, 1 DVB-T channel is found missing in Brandenburg, Germany
Novo Firmware disponível
Será só a minha que de vez em quando quando mudo de canal ou mexo no volume desliga e liga sozinha ?
Vou instalar o update a ver se muda algo .
Será só a minha que de vez em quando quando mudo de canal ou mexo no volume desliga e liga sozinha ?
Vou instalar o update a ver se muda algo .