Intel Penryn Performance Preview: The Fastest gets Faster

Também estranho não falares dos Phenom FX com TDP de 130W... :P

Qual é o link desta vez?

Na tabela da Vr-zone nao está nada referente a isso.

Tb nao percebo como é que nessa teoria os FX aumentam 41W o TDP em relação aos X4, quando a unica diferença entre eles será o multiplicador desbloqueado, ja que clock-rate, caches, etc é tudo igual
 
Pois...

Já o TDP dos FX-60 e afins eram iguais aos X2 e optys de "topo" (principalmente versões de 1 MB).

Mas como já foi dito, o TDP da AMD é diferente da Intel, 130W num kenstfield resultou numa "torradeira", enquanto 110w do meu antigo opteron erá tão "fresco" que os 65w dos conroe :002:
 
Pois...

Já o TDP dos FX-60 e afins eram iguais aos X2 e optys de "topo" (principalmente versões de 1 MB).

Mas como já foi dito, o TDP da AMD é diferente da Intel, 130W num kenstfield resultou numa "torradeira", enquanto 110w do meu antigo opteron erá tão "fresco" que os 65w dos conroe :002:

Não há nenhum Opteron que não tenha 1MB de cache L2 por core...
E para "torradeiras", já bastam os A64 X2 6000+, e os FX-70, FX-72 ou FX-74...
 
bem vou pegar um pouco atrás nas comparações de nº de transístores por cpu

essa comparação é um bocado estúpida uma vez que 50% dos cores da intel são cache, e isso leva muitos milhões de transistores, e como não dizem qts transistores tem cada cache, não vale a pena fazerem essas comparações
 
Eu acho que leste mal DJ...se reparares aquela "," serve para separar a frase.

Ou seja, os Yorkfield vêm no final de 2007 como diz o titulo da noticia e os Wolfdale é que saem em 2008.

Intel Plans to Initiate Production Shipments of 45nm Desktop Processors by Year End.
Intel’s “Yorkfield” to Ship in Q4, Available in Q1 – Sources


Intel Corp. plans to start shipping its quad-core microprocessors made using next-generation 45nm process technology for revenue in the fourth quarter of the year, sources familiar with the company’s plans revealed. But the world’s largest producer of x86 microprocessors is unlikely to release those chips for end-users this year.

Even though Intel’s code-named Yorkfield processors with four processing engines are still due to be introduced in Q1 2008, Intel Corp. will begin to ship them in Q4 2007 in order to allow computer makers to stockpile a significant amount of such chips before their official launch. Intel’s dual-core code-named Wolfdale chips will still begin to ship in Q1 2008, according to sources.
http://www.xbitlabs.com/news/cpu/display/20070702235718.html
 
Então a Intel tem os CPU's prontos no Q4 as lojas é que tem que ter grande stock por isso só lanlam oficialmente em 2008;)
 
Intel pushes Nehalem Into H2 2008

Intel has revealed some information on their Nehalem processor in the latest roadmap updates. The 45nm Hi-K Nehalem-EP is based on 4-issue Intel Core micro-architecture technology, supports Simultaneous multi-threading and Multi-level shared cache architecture (L2 and L3). Nehalem-EP processor will arrive earlier than expected, in H2 2008, and will pair up with Tylerburg chipsets. EP stands for Efficient Performance, one of the new naming schemes for server platforms. It should mean good energy efficency on 1-2 processor sockets. There are also Mission Critical (MC) markings, for best RAS from 2-512 processor sockets, Expandable (EX) is for RAS from 2-32 processor sockets as well as Entry (EN) on 1-2 processor sockets to better align with future IT usage.

Source: VR-Zone


cumps
 
Devia ser "Intel pulls (...)", e não "Intel pushes (...)".
Afinal, quando se está a adiantar o lançamento está-se a puxar (pull) para perto de nós, não a empurrar (push). :D
 
O nehalem é o CPU com controlador de memória incorporado e que usa um novo socket, right?

Sim, tem controlador de memória Triple Channel, para DDR3-1600.
O socket é o novo LGA 1366, que vai substituir os LGA 771 dos Xeon actuais.
Aínda não se sabe se a versão desktop vai ter um socket diferente (diferenças de pormenor como nos LGA 775 vs LGA 771 actuais, etc).
 
Estou a ficar um pouco confuso com estás novas saidas de processadores etc.... acham que vale a pena investir agora num PC Q6600 ou esperar mais algum tempo? desses processadores todos que vão sair vai existir algum que seja superior ao Q6600 e ao preço de 260€ mais ou menos?
 
45nm Xeon Clock Frequencies Leaked By Intel

The new batch of 45nm Xeons is actually based on the Penryn processor and also feature the 1333 MHz front-side bus found on the new Core 2 Duo stepping. Each die features 6MB of L2 cache resulting in a total of 12MB of L2 cache.
The latest 45nm Xeon ( Codename HarperTown ) Quad Core line is as follows
[---]
X5640 3.16 GHz 120W 1333 MHz 12MB
E5450 3.00 GHz 80W 1333 MHz 12MB
E5440 2.83 GHz 80W 1333 MHz 12MB
E5430 2.66 GHz 80W 1333 MHz 12MB
E5420 2.50 GHz 80W 1333 MHz 12MB
E5410 2.33 GHz 80W 1333 MHz 12MB
E5405 2.10 GHz 80W 1333 MHz 12MB
L5430 2.66 GHz 50W 1333 MHz 12MB
L5410 2.33 GHz 50W 1333 MHz 12MB

While the Dual Core 45nm Xeons ( Codenamed WolfDale ) are

E5260 3.33 GHz 65W 1333 MHz 6MB
E5205 1.86 GHz 65W 1066 MHz 6MB
L5250 3.16 GHz 40W 1333 MHz 6MB

Source: Intel




Intel Prices "Penryn" Xeons

Intel’s latest roadmap reveals pricing for its upcoming Penryn-based Xeon DP processors. The costs for Penryn-based Xeon DP processors start at $177 and top out at $1,172.
Intel has two Penryn-based quad-core Xeon DP processors under $300. The quad-core Xeon DP E5405 starts out at $209. The $209 price tag yields a quad-core Xeon DP processor clocked in the 2.0 GHz range, but below 2.33 GHz, with 12MB of L2 cache. Putting forth an extra $47 gets you the quad-core Xeon DP E5410 with its 2.33 GHz clock speed.

As the clock speed increases, the price gaps between quad-core Xeon models get larger. Intel prices the 2.50 GHz quad-core Xeon DP E5420 at $316. Stepping up to the next speed-bin comes at a $139 cost, for the 2.66 GHz quad-core Xeon E5430. The quad-core Xeon DP E5440 and its 2.83 GHz clock speed comes in at $690 -- $235 more than the E5430 with a 170 MHz lower clock speed.

Source: DailyTech

cumps

First Penryn Core 2 Chips Top At 3.33GHz

The Quad Core 2 Extreme processor will run at a frequency of 3.33 GHz have a 1333MHz FSB, 12MB L2 Cache and will retail for about 999$ when it gets released in Q4 2007. In addition to the Quad-Core 2 Extreme processor intel also plans to release two performance level 45nm quad-core processors which will also have a 1333 MHz FSB and 12MB L2 Cache. Another four 45nm dual-core processors (Wolfdale) will be launched in the first half of 2008. The first three processors will have a 1333MHz FSB and 6MB L2 Cache, while fourth will have a 1066MHz FSB and 3MB L2 Cache.

Source: Digitimes

VOMVAAAAA
 
Última edição pelo moderador:
Penryn no final do ano.

Intel Corp. has decided to bring the launch of its 45nm quad-core chips forward to the fourth quarter of 2007. This will allow the company to be in full position to compete against the new family of products by its main rival Advanced Micro Devices.

According to documents seen by X-bit labs, Intel will release its new “Intel Core Extreme” processor with four processing engines made using 45nm process technology in Q4 2007. The document states that “launch of the Intel Core Extreme processor pulls into Q4’07,” emphasizing that the actual brand-name of the product is not yet determined. What is highly likely is that the top-of-the range extreme processor will be clocked at 3.33GHz, will use 1333MHz processor system bus and will have 12MB of level-two cache in total.
Contemporary mainboards based on Intel 3-series chipsets already support Intel’s 45nm central processing units, whereas some mainboard makers, namely Asustek Computer, have also enabled support for the new chips on previous-generation motherboards.
Initially there will be only about 2% - 3% of Intel’s desktop chips code-named Yorkfield made using 45nm process technology in the chipmaker’s product mix, however, the share of quad-core 45nm offerings will increase to 5% - 6% in Q2 2008, whereas the volume of 45nm products will get to little less than 30% of the desktop product mix in the second quarter next year.
Initially it was projected that Intel’s new quad-core processors based on improved micro-architecture that is usually referred to as “Penryn” will be launched in the first quarter of 2008, but the company has changed its plans and now such chips will be available already in the fourth quarter of 2007, in time to compete against AMD Phenom processors based on the K10 micro-architecture.
Intel announced in March that the new “Penryn” chips produced using 45nm process technology will have greater instructions per clock (IPC) execution, which means that they will be faster and more efficient even at the same clock-speeds with the current generation chips. Besides, the new chips will be able to run at higher clock-speeds compared to today’s Core 2 Duo and Core 2 Quad products.
The major micro-architectural improvements for new Intel Core 2 processors, besides SSE4 instruction set, include the so-called Unique Super Shuffle Engine and Radix 16 technique. The Super Shuffle Engine is a full-width, single-pass shuffle unit that is 128-bits wide, which can perform full-width shuffles in a single cycle. This significantly improves performance for SSE2, SSE3 and SSE4 instructions that have shuffle-like operations such as pack, unpack and wider packed shifts. This feature will increase performance for content creation, imaging, video and high-performance computing. Radix 16 technique, according to Intel, roughly doubles the divider speed over previous generations for computations used in nearly all applications. In addition, Intel also improved virtualization technology as well as added some features to dynamic acceleration technology, which is supposed to boost single-threaded applications’ performance on multi-core chips.
Each of Intel’s dual-core Penryn chips will have 410 million transistors, up significantly from 291 million of current dual-core Conroe processors, however, thanks to 45nm process technology, the chips will have die size of 107 square millimeters, down about 25% from 155 square millimeters of the Conroe.
Fonte
 
5569_large_tick-tock.png
5570_large_pfop.png


There's more to Intel's next-generation processor family than the 45nm process node

Intel plans to unleash its Penryn family processors next quarter, shortly after AMD releases Barcelona. Penryn is the umbrella for all 45nm Core 2 micro architecture products, including quad-core Xeon Harpertown, quad-core Core 2 Yorkfield and dual-core Xeon, Core 2 Wolfdale processors.

On the surface, Penryn looks like die shrink of last year’s Conroe micro architecture, but Intel sought additional tweaks to the micro architecture to achieve greater performance at the same clock speeds as Conroe processors.

Intel improves existing Wide Dynamic Execution, Advanced Smart Cache, Advanced Digital Media Boost and Intelligent Power Capability, technologies that previously made its debut with Conroe and Merom.

Penryn enhances Wide Dynamic Execution technology with a fast radix-16 divider and improved Virtualization technology. With a fast radix-16 divider, the processor can process 4-bits per cycle instead of the 2-bits per cycle of Conroe – doubling the divide instruction capabilities. Intel VT technology receives enhancements that reduce virtual machine transition latencies by 25-to-75%.

Intel Advanced Smart Cache technology receives additional enhancements, besides the increased L2 cache. Penryn-based quad and dual-core processors will have up to 12MB and 6MB L2 cache, respectively. Intel reduces cache latency in addition to the larger sizes. Penryn features a 24-way associative cache, an upgrade from Conroe’s 16-way associative cache.

New to the Advanced Digital Media Boost technology is the inclusion of a new Intel SSE4 instruction set. SSE4 introduces 47 new instructions to improve performance of video accelerators, graphics building blocks and streaming load. Intel claims a 2x performance gain in video acceleration tasks. There are 14 new instructions for video accelerator performance enhancement. Intel improves compiler auto-vectorization performance with 32 new instructions.

Intel expects SSE4 optimizations to deliver performance improvements in video authoring, imagine, graphics, video search, off-chip accelerators, gaming and physics applications. Also new to Advanced Digital Media Boost is the Super Shuffle Engine. Intel’s Super Shuffle Engine allows for shuffling unpacking, packing, align concatenated sources, wide shifts, insertion and extraction, and setup for horizontal arithmetic functions. Intel claims a “2x faster SSE shuffle instruction execution,” according to briefing documents.

Mobile Penryn processors receive enhanced power saving technologies. New to the mobile Penryn is a deep power down state. In the deep power down state, the processor lowers the core voltage, more so than in the C4 state, and turns off the L1 and L2 caches. Intel claims significant power savings in idle modes for extended battery life with the new power state.

For servers and workstations, Intel has designed Harpertown with additional headroom for the front-side bus. Intel plans to debut Penryn-based Xeon DP, MP and UP processors with 1333 MHz front-side bus, but the architecture has headroom for up to 1600 MHz front-side bus. Penryn-based quad and dual-core Xeons will have three thermal envelopes. Quad-core Harpertown Xeons will have 50, 80 and 120-watt TDP ratings while dual-core Wolfdale Xeons have 40, 65 and 80-watt ratings.

Desktop Core 2 and Core 2 Extreme processors have less thermal bins. Quad-core Yorkfield models have 95 and 130-watt TDPs while dual-core Wolfdale models have a single 65-watt TDP. Intel hasn’t set thermal ratings for its mobile Penryn processors yet.

Penryn follows Intel’s plans of alternating between new fabrication processes and a completely new core within two years. Intel previously released its 65nm fabrication process with the last of its Netburst Pentium D and Xeon DP processors, with Conroe, a new architecture, following months after. Once again, Penryn is a die shrink of Conroe set to debut Intel’s 45nm fabrication process.

Following Penryn is a new Nehalem architecture, based on 45nm with Intel’s new QuickPath technology, formerly known as common-system interface. Nehalem is set for a 2008 introduction, beginning with the Xeon family for servers and workstations. Intel plans to shrink Nehalem to 32nm with the Westmere core. Following Westmere is Sandy Bridge, a new micro architecture based on 32nm.

Expect Intel to debut Penryn later this year with the Xeon family.

Fonte
 
Back
Topo