S
SUp3rFM
Guest
O pessoal da OC Workbench lançou uma bios para a ECS K7S5A com opções de overclocking de raiz!
Ao que parece, estas opções sempre estiveram presentes nas bios anteriores, mas a ECS nunca as activou (foram sendo disponibilizadas através das hacked bios).
Ficam aqui as novidades porreiras desta bios:
Release notes:
- Adjust timing for stability and compatibility
- FSB modes reprogrammed:
"100/100 MHz" changed from 99.6 to 100.9 MHz
"133/133 MHz" changed from 132.77 to 133.9 MHz
No more underclocking by default!
- Several FSB modes added. New list of available modes:
100/100 MHz
100/133 MHz
133/133 MHz -> Default modes
66/66 MHz (H/W Trap)
112/112 MHz
124/124 MHz
138/138 MHz
150/150 MHz
166/166 MHz -> Already present in the "OC" bios
107/107 MHz
133/100 MHz
143/143 MHz
147/147 MHz
133/166 MHz
160/120 MHz
200/200 MHz
Please note that the "166 MHz no-boot issue" hasn't been dealt with in this bios modification. It seems that bios timings need to be adjusted to allow booting at such speed. This issue could also affect 160/120 and 200/200 settings.
- A few bios options have been enabled with amibcp. Please notice that none of these settings have been fixed or reprogrammed at all.
- PCI Latency Timer (some people has reported it doesn't work in ECS 020325, though)
- PCI IDE busmaster
- Offboard PCI IDE card (might be useful for people using IDE/SCSI cards)
- PCI slot #1 to #4 IRQ priority
- And last but not least, silly logo added!
Toda a info está aqui:
http://forum.ocworkbench.com/ocwbcgi/ultimatebb.cgi?ubb=get_topic&f=27&t=003724
------------------
Os meus problemas que tinha com esta board foram TODOS resolvidos no momento que comprei DDR de qualidade, neste caso, DDR da Kingston (chip Nanya). A board está-se a portar lindamente.
Vou tentar OC o meu 1800, vou começar por um 138/138, depois uns 143.
Ao que parece, estas opções sempre estiveram presentes nas bios anteriores, mas a ECS nunca as activou (foram sendo disponibilizadas através das hacked bios).
Ficam aqui as novidades porreiras desta bios:
Release notes:
- Adjust timing for stability and compatibility
- FSB modes reprogrammed:
"100/100 MHz" changed from 99.6 to 100.9 MHz
"133/133 MHz" changed from 132.77 to 133.9 MHz
No more underclocking by default!
- Several FSB modes added. New list of available modes:
100/100 MHz
100/133 MHz
133/133 MHz -> Default modes
66/66 MHz (H/W Trap)
112/112 MHz
124/124 MHz
138/138 MHz
150/150 MHz
166/166 MHz -> Already present in the "OC" bios
107/107 MHz
133/100 MHz
143/143 MHz
147/147 MHz
133/166 MHz
160/120 MHz
200/200 MHz
Please note that the "166 MHz no-boot issue" hasn't been dealt with in this bios modification. It seems that bios timings need to be adjusted to allow booting at such speed. This issue could also affect 160/120 and 200/200 settings.
- A few bios options have been enabled with amibcp. Please notice that none of these settings have been fixed or reprogrammed at all.
- PCI Latency Timer (some people has reported it doesn't work in ECS 020325, though)
- PCI IDE busmaster
- Offboard PCI IDE card (might be useful for people using IDE/SCSI cards)
- PCI slot #1 to #4 IRQ priority
- And last but not least, silly logo added!
Toda a info está aqui:
http://forum.ocworkbench.com/ocwbcgi/ultimatebb.cgi?ubb=get_topic&f=27&t=003724
------------------
Os meus problemas que tinha com esta board foram TODOS resolvidos no momento que comprei DDR de qualidade, neste caso, DDR da Kingston (chip Nanya). A board está-se a portar lindamente.
Vou tentar OC o meu 1800, vou começar por um 138/138, depois uns 143.
