Laptop wireless problemas

miguelgg

Power Member
Boas,
instalei à pouco tempo o ubuntu 8.10 e tenho a dizer que foi uma instalação bastante suave e correu bem. Ficou tudo bem tirando um pequeno pormenor, a minha placa wireless embora o linux a detecte simplesmente pareço não conseguir liga-la fisicamente, ou seja, o botao do portatil parece não funcionar para a ligar.
Como funcionava ontem com o windows acredito que seja alguma coisa que me falta fazer. O meu portatil é um Extensa 5220.

Espero que alguém me possa dar uma ajuda sobre o que fazer em relação a este problema.
 
Boas,
instalei à pouco tempo o ubuntu 8.10 e tenho a dizer que foi uma instalação bastante suave e correu bem. Ficou tudo bem tirando um pequeno pormenor, a minha placa wireless embora o linux a detecte simplesmente pareço não conseguir liga-la fisicamente, ou seja, o botao do portatil parece não funcionar para a ligar.
Como funcionava ontem com o windows acredito que seja alguma coisa que me falta fazer. O meu portatil é um Extensa 5220.

Espero que alguém me possa dar uma ajuda sobre o que fazer em relação a este problema.

Se te referes à luz do portatil, não vai ligar. Ao menos consegues ligar-te a uma rede wireless?
 
https://wiki.ubuntu.com/LaptopTestingTeam/AcerExtensa5220 disse:
Wireless NIC

Install bcm43xx-fwcutter. Post-installation configuration may fail due to a 404 error, if so, change http://boredklink.googlepages.com/wl_apsta.o to http://xeve.de/down/wl_apsta.o in /usr/share/bcm43xx-fwcutter/install_bcm43xx_firmware.sh, and run sudo dpkg-reconfigure bcm43xx-fwcutter
If you'd prefer to use a native windows driver with ndiswrapper (as this method sometimes works better), you can use the guide at https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx/Feisty_No-Fluff following step 2b when you get to it.

  • Ubuntu GNU/Linux 7.10 (Gutsy Gibbon): works "out of the box" using restricted driver.
  • Ubuntu GNU/Linux 8.04 (Hardy Heron): works "out of the box" using proposed B43 restricted driver, but needs to download the package. Once activated the driver, clicking with secondary mouse button on NetworkManager (the net-PC icon) disable and re-enable the Wireless checkbox.
  • Ubuntu GNU/Linux 8.10 (INtrepid Ibex): works "out of the box" using proposed B43 restricted driver, but needs to download the package. Once activated the driver, clicking with secondary mouse button on NetworkManager (the net-PC icon) disable and re-enable the Wireless checkbox.

Hardware Switch/LED

The switch on the front side of the laptop which enables and disables WLAN works, but the LED which indicates WLAN state is inverted. It lights when WLAN is disabled and is dark when it's enabled. Loading bcm43xx with option noleds=1 does not help, neither does the acerhk module: Setting the WLAN state through acerhk simply does not work. Note: It works exactly the same in Microsoft Windows (LED is off, when WLAN is activated and on when WLAN is disabled), so perhaps this is a new Acer "policy" or design decision...
F-3000: My experiences (at 4.12.2007): I haven't had similar effects regarding Microsoft Windows Vista and that LED. Although, first time when I was able to successfully install the (restricted) drivers, the led worked inverted for a short time, and since then, it's been dark with Kubuntu. I'll do further examining once I get my hands on the laptop.
 
Back
Topo