Ricardo_Bisa
Power Member
Boas queria uma motherboard para o AMD 5000+ BE e gostava de saber se há uma grande diferença entre PCI 2.0 e 1.0 .
O orçamento é 100 € no máximo.
Cumps
O orçamento é 100 € no máximo.
Cumps
Motherboard para AMD 5000+ Black Edition
- Autor do tópico Ricardo_Bisa
- Data Início
rustyballzz
Power Member
Ricardo_Bisa
Power Member
O CHIPSET da asus é 8800 nvidea e o da gygabyte é amd 7xx há muita diferença entre esses chips ou não ha muita porque senão vou pela asus pois é mais barata e ja tem pci 2.0.
A mother board é para usar com uma sapphire 4850.
Cumps
A mother board é para usar com uma sapphire 4850.
Cumps
RedDevil76
Power Member
Boas
Sem duvida alguma a GIGABYTE GA-MA790X-DS4 com o chipset mais "recente" AMD 790X e AMD SB600 garatindo uma maior compatibilidade com processadores AMD .
Specs:
http://www.*****.pt/products_images/GA-MA790X-DS4.jpg
CPU
Support for Socket AM2+/ AM2 processors:
AMD Phenom FX processor/ AMD Phenom processor/ AMD Athlon 64 FX processor/
AMD Athlon 64 X2 Dual-Core processor/AMD Athlon 64 processor/
AMD Sempron processor
Hyper Transport Bus 5200/2000 MT/s
Chipset
1. North Bridge: AMD 790X
2. South Bridge: AMD SB600
Memory
1. 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory (Note 1)
2. Dual channel memory architecture
3. Support for DDR2 1066(Note 2)/800/667 MHz memory modules
4. Support ECC Memory(Note 3)
Audio
1. Realtek ALC889A codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Support for S/PDIF In/Out
5. Support for CD In
LAN Realtek 8111B chip (10/100/1000 *****)
Expansion Slots
1. 2 x PCI Express x16 slots supporting ATI CrossFireXT technology (Note 4) (The PCIE_16_1 slot supports x16; the PCIE_16_2 supports x8. The PCI Express x16 slots conform to PCI Express 2.0 standard.)
2. 3 x PCI Express x1 slot
3. 2 x PCI slots
Storage Interface South Bridge:
1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2. 4 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3) supporting up to 4 SATA 3Gb/s devices
3. Support for SATA RAID 0, RAID 1 and RAID 0+1
iTE IT8718 chip:
1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
IEEE 1394 T.I. TSB43AB23 chip
1. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a headers)
USB Integrated in the South Bridge
1. Up to 10 USB 2.0/1.1 ports (6 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 1 x 4-pin PCIe 12V power connector
4. 1 x floppy disk drive connector
5. 1 x IDE connector
6. 4 x SATA 3Gb/s connectors
7. 1 x CPU fan header
8. 2 x system fan headers
9. 1 x power fan header
10. 1 x North Bridge fan header
11. 1 x front panel header
12. 1 x front panel audio header
13. 1 x CD In connector
14. 1 x S/PDIF In header
15. 1 x S/PDIF Out header
16. 2 x USB 2.0/1.1 headers
17. 1 x IEEE 1394a headers
18. 1 x parallel port header
19. 1 x power LED header
20. 1 x chassis intrusion header
Back Panel Connectors
1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x serial port
4. 1 x coaxial S/PDIF Out connector
5. 1 x optical S/PDIF Out connector
6. 6 x USB 2.0/1.1 ports
7. 2 x IEEE 1394a ports
8. 1 x RJ-45 port
9. 6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear Speaker Out) / Center / Subwoofer Speaker Out / Side Speaker Out)
I/O Controller iTE IT8718 chip
H/W Monitoring System voltage detection
1. CPU/System temperature detection
2. CPU/System/Power fan speed detection
3. CPU overheating warning
4. CPU/System/Power fan fail warning
5. CPUfan speed control
BIOS
1. 2 x 4 ***** flash
2. Use of licensed AWARD BIOS
3. Support for Dual BIOST
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
1. Support for @BIOS
2. Support for Download Center
3. Support for Q-Flash
4. Support for EasyTune (Note 5)
5. Support for Xpress Install
6. Support for Xpress Recovery2
7. Support for Virtual Dual BIOS
Bundle Software Norton Internet Security (OEM version)
Overclocking Voltage adjustments in BIOS Setup (CPU/DDR2/Chipset/PCIE/FSB/HTT/HTR) allow you to:
1. Increase CPU voltage (Note 6)
2. Increase DDR2 voltage by 0.05V to 0.50V with 0.05V increment
3. Increase Chipset voltage by 0.05V to 0.40V with 0.05V increment
4. Increase PCI Express voltage by 0.05V to 0.45V with 0.05V increment
5. Increase FSB voltage by 0.05V to 0.35V with 0.05V increment
6. Increase HTT voltage by 0.05V to 0.40V with 0.05V increment
7. Increase HTR voltage by 0.05V to 0.45V with 0.05V increment
Frequency adjustments in BIOS Setup (CPU/HT Link/PCIE/DDR2) allow you to:
1. Adjust CPU host frequency from 200 MHz to 500 MHz with 1 MHz increment
2. Adjust HT Link frequency
3. Adjust PCI Express frequency from 100 MHz to 200 MHz with 1 MHz increment
4. Adjust DDR2 frequency
Operating System Support for Microsoft Windows Vista/XP/2000
Form Factor ATX Form Factor; 30.5cm x 22 .4cm
Note (Note 1) Due to Windows XP 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) Whether 1066 MHz memory speed is supported depends on the CPU being used.
(Note 3) Use of a CPU that supports ECC is required if you wish to install ECC memory.
(Note 4) When the CrossFireXT technology is enabled, the PCIE_16_1 slot will operate in x8 mode. If you are installing a single PCI Express x16 graphics card, please install it in the PCIE_16_1 slot for optimum performance.
(Note 5) Available functions in Easytune may differ by motherboard model.
(Note 6) The adjustable CPU voltage range depends on the CPU being used.
Ja tive umas destas emprestada para testes durante 1 semanita num X2 6000+ e simplesmente adorei,muito rapida.
Sem duvida alguma a GIGABYTE GA-MA790X-DS4 com o chipset mais "recente" AMD 790X e AMD SB600 garatindo uma maior compatibilidade com processadores AMD .
Specs:
http://www.*****.pt/products_images/GA-MA790X-DS4.jpg
CPU
Support for Socket AM2+/ AM2 processors:
AMD Phenom FX processor/ AMD Phenom processor/ AMD Athlon 64 FX processor/
AMD Athlon 64 X2 Dual-Core processor/AMD Athlon 64 processor/
AMD Sempron processor
Hyper Transport Bus 5200/2000 MT/s
Chipset
1. North Bridge: AMD 790X
2. South Bridge: AMD SB600
Memory
1. 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory (Note 1)
2. Dual channel memory architecture
3. Support for DDR2 1066(Note 2)/800/667 MHz memory modules
4. Support ECC Memory(Note 3)
Audio
1. Realtek ALC889A codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Support for S/PDIF In/Out
5. Support for CD In
LAN Realtek 8111B chip (10/100/1000 *****)
Expansion Slots
1. 2 x PCI Express x16 slots supporting ATI CrossFireXT technology (Note 4) (The PCIE_16_1 slot supports x16; the PCIE_16_2 supports x8. The PCI Express x16 slots conform to PCI Express 2.0 standard.)
2. 3 x PCI Express x1 slot
3. 2 x PCI slots
Storage Interface South Bridge:
1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2. 4 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3) supporting up to 4 SATA 3Gb/s devices
3. Support for SATA RAID 0, RAID 1 and RAID 0+1
iTE IT8718 chip:
1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
IEEE 1394 T.I. TSB43AB23 chip
1. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a headers)
USB Integrated in the South Bridge
1. Up to 10 USB 2.0/1.1 ports (6 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 1 x 4-pin PCIe 12V power connector
4. 1 x floppy disk drive connector
5. 1 x IDE connector
6. 4 x SATA 3Gb/s connectors
7. 1 x CPU fan header
8. 2 x system fan headers
9. 1 x power fan header
10. 1 x North Bridge fan header
11. 1 x front panel header
12. 1 x front panel audio header
13. 1 x CD In connector
14. 1 x S/PDIF In header
15. 1 x S/PDIF Out header
16. 2 x USB 2.0/1.1 headers
17. 1 x IEEE 1394a headers
18. 1 x parallel port header
19. 1 x power LED header
20. 1 x chassis intrusion header
Back Panel Connectors
1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x serial port
4. 1 x coaxial S/PDIF Out connector
5. 1 x optical S/PDIF Out connector
6. 6 x USB 2.0/1.1 ports
7. 2 x IEEE 1394a ports
8. 1 x RJ-45 port
9. 6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear Speaker Out) / Center / Subwoofer Speaker Out / Side Speaker Out)
I/O Controller iTE IT8718 chip
H/W Monitoring System voltage detection
1. CPU/System temperature detection
2. CPU/System/Power fan speed detection
3. CPU overheating warning
4. CPU/System/Power fan fail warning
5. CPUfan speed control
BIOS
1. 2 x 4 ***** flash
2. Use of licensed AWARD BIOS
3. Support for Dual BIOST
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
1. Support for @BIOS
2. Support for Download Center
3. Support for Q-Flash
4. Support for EasyTune (Note 5)
5. Support for Xpress Install
6. Support for Xpress Recovery2
7. Support for Virtual Dual BIOS
Bundle Software Norton Internet Security (OEM version)
Overclocking Voltage adjustments in BIOS Setup (CPU/DDR2/Chipset/PCIE/FSB/HTT/HTR) allow you to:
1. Increase CPU voltage (Note 6)
2. Increase DDR2 voltage by 0.05V to 0.50V with 0.05V increment
3. Increase Chipset voltage by 0.05V to 0.40V with 0.05V increment
4. Increase PCI Express voltage by 0.05V to 0.45V with 0.05V increment
5. Increase FSB voltage by 0.05V to 0.35V with 0.05V increment
6. Increase HTT voltage by 0.05V to 0.40V with 0.05V increment
7. Increase HTR voltage by 0.05V to 0.45V with 0.05V increment
Frequency adjustments in BIOS Setup (CPU/HT Link/PCIE/DDR2) allow you to:
1. Adjust CPU host frequency from 200 MHz to 500 MHz with 1 MHz increment
2. Adjust HT Link frequency
3. Adjust PCI Express frequency from 100 MHz to 200 MHz with 1 MHz increment
4. Adjust DDR2 frequency
Operating System Support for Microsoft Windows Vista/XP/2000
Form Factor ATX Form Factor; 30.5cm x 22 .4cm
Note (Note 1) Due to Windows XP 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) Whether 1066 MHz memory speed is supported depends on the CPU being used.
(Note 3) Use of a CPU that supports ECC is required if you wish to install ECC memory.
(Note 4) When the CrossFireXT technology is enabled, the PCIE_16_1 slot will operate in x8 mode. If you are installing a single PCI Express x16 graphics card, please install it in the PCIE_16_1 slot for optimum performance.
(Note 5) Available functions in Easytune may differ by motherboard model.
(Note 6) The adjustable CPU voltage range depends on the CPU being used.
Ja tive umas destas emprestada para testes durante 1 semanita num X2 6000+ e simplesmente adorei,muito rapida.
Ricardo_Bisa
Power Member
Assim é essa mesmo que vou comprar!
Cumps a todos e obrigado pela ajuda!
Cumps a todos e obrigado pela ajuda!
compositor20
Power Member
calma
vai sair a nova gigabyte com chipset amd 790gx... aguenta mais um pouco ... tem tudo o que essa tem e ainda gráficos integrados e o novo southbridge 750... melhor overclock mais portas usb e mias rapidas... raid 5.
suporte para cpus até 140w.... é melhor aguardares que assim ainda podes por um deneb quad core 45nm daqui a um ano...
tem hdmi tambem
vai sair a nova gigabyte com chipset amd 790gx... aguenta mais um pouco ... tem tudo o que essa tem e ainda gráficos integrados e o novo southbridge 750... melhor overclock mais portas usb e mias rapidas... raid 5.
suporte para cpus até 140w.... é melhor aguardares que assim ainda podes por um deneb quad core 45nm daqui a um ano...
tem hdmi tambem
Ricardo_Bisa
Power Member
Boas na *****
(http://www.*****.pt/index.aspx?p=CartPage&a=Remove&ProdId=3449&Stamp=#?p=CatPage&CatId=319)
destas motherboards quais as que tem pcix 2.0 e ate ao 80 qual a melhor? (Sem ser a a asus sli)
Cumps
(http://www.*****.pt/index.aspx?p=CartPage&a=Remove&ProdId=3449&Stamp=#?p=CatPage&CatId=319)
destas motherboards quais as que tem pcix 2.0 e ate ao 80 qual a melhor? (Sem ser a a asus sli)
Cumps
compositor20
Power Member
as melhores boards da ***** para amd sao a gigabyte de 100 euros e a de 80...a mais barata tem gráficos integrados aceleraçao de HD e a outra tem crossfire...
sao as duas melhores do que as asus
sao as duas melhores do que as asus
Ricardo_Bisa
Power Member
pois mas a de 80 € é microatx ... 