Problema Old School Motherboard

hefguerra

hefguerra

Power Member
Bom dia,
Precisava de ajuda aqui para a minha velharia. Tenho uma Gigabyte ga-p31-es3g, e pretendia instalar o SO através do Sata2, mas não me é reconhecido o disco. Andei a pesquisar e vi que se tem de configurar na bios a opção Raid, mas essa opção nao encontro na Bios.
Alguma soluçao?
Cumprimentos
 
  • Gigabyte GA-P31-ES3G
  • CPU
    1. Support for an Intel® Core™ 2 Extreme processor/ Intel® Core™ 2 Quad processor/ Intel® Core™ 2 Duo processor/ Intel®Pentium® processor Extreme Edition/Intel® Pentium® D processor/ Intel® Pentium® 4 processor Extreme Edition/Intel®Pentium® 4 processor/ Intel® Celeron® processor in the LGA 775 package
    2. L2 cache varies with CPU
  • Front Side Bus
    1. 1600(O.C.)/1333/1066/800 MHz FSB
  • Chipset
    1. North Bridge: Intel® P31/G31 Express
    2. South Bridge: Intel® ICH7
  • Memory
    1. 2 x 1.8V DDR2 DIMM sockets supporting up to 4 GB of system memory
    2. Dual channel memory architecture
    3. Support for DDR2 1066/800/667 MHz memory modules
    * Please refer "Memory Support List" for memory support information.
  • Audio
    1. Realtek ALC888 codec
    2. High Definition Audio
    3. 2/4/5.1-channel
    4. Support for S/PDIF Out
    5. Support for CD In
  • LAN
    1. RTL 8111C chip (10/100/1000 *****)
  • Expansion Slots
    1. 1 x PCI Express x16 slot
    2. 3 x PCI Express x1 slots
    3. 3 x PCI slots
  • Storage Interface
    South Bridge:
    1. 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
    2. 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
    iTE IT8718 chip:
    1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
  • USB
    1. Integrated in the South Bridge
    2. Up to 8 USB 2.0/1.1 ports (4 on the back connected to the internal USB headers)
  • Internal I/O Connectors
    1. 1 x 24-pin ATX main power connector
    2. 1 x 4-pin ATX 12V power connector
    3. 1 x floppy disk drive connector
    4. 1 x IDE connector
    5. 4 x SATA 3Gb/s connectors
    6. 1 x CPU fan header
    7. 1 x system fan header
    8. 1 x power fan header
    9. 1 x front panel header
    10. 1 x front panel audio header
    11. 1 x CD In connector
    12. 1 x S/PDIF Out header
    13. 2 x USB 2.0/1.1 headers
    14. 1 x chassis intrusion header
    15. 1 x power LED header
  • Back Panel Connectors
    1. 1 x PS/2 keyboard port
    2. 1 x PS/2 mouse port
    3. 1 x parallel port
    4. 1 x serial port
    5. 1 x coaxial S/PDIF Out connector
    6. 4 x USB 2.0/1.1 ports
    7. 1 x RJ-45 port
    8. 3 x audio jacks (Line In/Line Out/Microphone)
  • I/O Controller
    1. iTE IT8718 chip
  • H/W Monitoring
    1. System voltage detection
    2. CPU temperature detection
    3. CPU/System fan speed detection
    4. CPU overheating warning
    5. CPU/System fan fail warning
    6. CPU fan speed control
  • BIOS
    1. 1 x 4 ***** flash
    2. Use of licensed AWARD BIOS
    3. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
  • Unique Features
    1. Support for @Bios
    2. Support for Download Center
    3. Support for Q-Flash
    4. Support for EasyTune
    5. Support for Xpress Install
    6. Support for Xpress Recovery2
    7. Support for Dual BIOS
    8. Support for Easy Energy Saver
  • Bundle Software
    1. Norton Internet Security (OEM version)
  • Operating System
    1. Support for Microsoft® Windows Vista/XP/2000
  • Form Factor
    1. ATX Form Factor; 30.5cm x 19.4cm
 
Bom dia,
Aconteceu uma situação com o pc e pretendia a vossa ajuda. Quando o limpei pela primeira vez, tudo estava a funcionar, o pc ligava e apresentava imagem. Fiz uns updates ao windows e o pc liga, mas não dá imagem. Tenho uma Gigabyte ga-p31-es3g + Gigabyte 9400gt. A única maneira que tenho de passar imagem é pelo dvi da gráfica, pois não tenho nenhum adaptador para ligar pela motherboard. Já tirei a pilha a board, vi os componentes tirei e voltei a por e não apresenta imagem. Poderá ser da board ou da gráfica? Tudo funcionava antes de fazer updates...
cumprimentos
 
Inicie sessão ou registe-se para poder participar.
Back
Topo