Problema na gravação de DVD's

experimenta ver no primary channel

ps: também reparei que no gestor de dispositivos tens VSO Devices, isso por vezes é criado quando instalas programas de gravação, e que pode estar em conflito com os drivers do windows

ps2: encontrei esta informação
If you don't have the Intel Application Accelerator installed:
Start -> Control Panel -> System -> Hardware tab -> Device Manager. Expand the + next to 'IDE ATA/ATAPI controllers'. Right click on both the Primary IDE Channel and the Secondary IDE Channel, select Properties and then the 'Advanced Settings' tab. On both Device 0 and Device 1 the 'Transfer Mode' should read "DMA if Available" and right below that box next to 'Current Transfer Mode' it should say "Ultra DMA..." or "...DMA....", it should not say anything about 'PIO'.
If you have it set to 'DMA if Available' and the current transfer mode is PIO, then right click on the Primary IDE Channel and/or the Secondary IDE channel and select 'Uninstall'. Reboot and Windows will redetect that IDE channel and install the devices on it. When that's done both the Transfer Mode and the Current Transfer Mode should be DMA.
If you have the Intel Application Accelerator installed:
You will not have the 'Advances Settings' tab in the Properties of that IDE Channel. Run the Intel Application Accelerator program from your Software Programs group and change the DMA mode from that program.

para o caso de teres o Intel Application Accelerator

cumps
 
Última edição:
If you have the Intel Application Accelerator installed:
You will not have the 'Advances Settings' tab in the Properties of that IDE Channel. Run the Intel Application Accelerator program from your Software Programs group and change the DMA mode from that program.
Hum... software programs group? Não sei como fazer isto, mas obrigada pela a tua ajuda helius. :)

Braz I Braz,
já tentei com o divx mas não consigo ver.
 
Última edição:
Não aparece que tenho instalado esse programa. Vou ver se é possível sacá-lo.

Consegui sacar o programa mas não é compatível com o meu hardware. :(
 
Última edição:
estranho, devia ser, eu já instalei esse prog. num pentium IV,
não estou a ver então a solução para o teu problema, já viste que device é aquele VSO, pode ser que tenha a haver com algum software de gravação que tenhas (por exemplo: Copy2DVD ou DVDFab)
 
Já experimentei com vários softwares de gravação:
Nero Express/Bruning Rom
Ashampoo Burning Studio
CDBurner XP Pro

Penso que o VSO Device seja o VSO ConvertXtoDVD, mas não tenho a certeza.

A única coisa que consigo gravar são cd's e já consegui gravar um dvd com o Alcohol 120%, mas o ficheiro era do tipo .iso.

Braz I Braz, o único problema é que eu não tenho esse separador das definições avançadas. :(
 
Última edição:
já experimentaste eliminar no gestor de dispositivos os controladores como vinha explicado aqui
then right click on the Primary IDE Channel and/or the Secondary IDE channel and select 'Uninstall'. Reboot and Windows will redetect that IDE channel and install the devices on it.

pode ser que assim resulte
 
then right click on the Primary IDE Channel and/or the Secondary IDE channel and select 'Uninstall'. Reboot and Windows will redetect that IDE channel and install the devices on it.

Eu ja lhe tinha dito isso .acho eu
 
Continua a não funcionar. :( Será que é o próprio computador que não consegue aguentar o gravador? É que o gravador é um dos mais recentes e este computador já tem uns bons 4 anos...
 
Ok, já reinstalei isto tudo e já activei o DMA mas contínuo sem conseguir gravar. Mais alguma ideia para resolver esta situação..? É que eu preciso imenso do gravador. :(
 
Back
Topo