1. Este site usa cookies. Ao continuar a usar este site está a concordar com o nosso uso de cookies. Saber Mais.
  2. A secção Microsoft/Windows encontra-se actualmente em processo de reestruturação.
    Remover anúncio

problemas c/ modem série no linux

Discussão em 'Windows Desktop e Surface' iniciada por mafas, 7 de Fevereiro de 2003. (Respostas: 4; Visualizações: 960)

  1. mafas

    mafas Power Member

    Olá a todos.

    Tenho um modem SupraExpress 56e PRO (porta série) e ainda não consegui usá-lo no Suse Linux 8.


    Já tentei configurá-lo de várias maneiras mas o problema parece ser o "wait for dial tone", se está ON o modem não liga, se está OFF liga mas ouve-se o que parece ser uma voz a dizer que o número não existe ou coisa parecida.

    Gravei o ficheiro log das várias tentativas:

    SuSE Meta pppd (smpppd), Version 0.73 on linux.
    wwwoffle not is running
    Selection of interface/provider "ppp0"/"Vizzavi" succeeded.
    Starting connection. (2003-02-06 23:00:56 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Perms of /dev/modem are ok, no 'mesg n' neccesary.
    pppd: --> WvDial: Internet dialer version 1.42
    pppd: --> Initializing modem.
    pppd: --> Sending: ATZ
    pppd: ATZ
    pppd: OK
    pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    pppd: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    pppd: OK
    pppd: --> Sending: ATM1
    pppd: ATM1
    pppd: OK
    pppd: --> Sending: ATX3
    pppd: ATX3
    pppd: OK
    pppd: --> Modem initialized.
    pppd: --> Sending: ATDT679190000
    pppd: --> Waiting for carrier.
    pppd: ATDT679190000
    Stopping connection. (2003-02-06 23:01:10 WET)
    pppd: Terminating on signal 15.
    pppd: Connect script failed
    We are disconnected. (2003-02-06 23:01:12 WET)
    pppd died: Connect script failed (exit code 8)
    Reloading configuration.
    Reloading interfaces and providers.
    Selection of interface/provider "ppp0"/"Vizzavi" succeeded.
    Starting connection. (2003-02-06 23:04:48 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Failed to open /dev/ttyACM0: Invalid argument
    pppd died: Serial port open failed (exit code 7)
    Starting connection. (2003-02-06 23:04:55 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Failed to open /dev/ttyACM0: Invalid argument
    pppd died: Serial port open failed (exit code 7)
    Starting connection. (2003-02-06 23:04:56 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Failed to open /dev/ttyACM0: Invalid argument
    pppd died: Serial port open failed (exit code 7)
    Starting connection. (2003-02-06 23:04:57 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Failed to open /dev/ttyACM0: Invalid argument
    pppd died: Serial port open failed (exit code 7)
    Starting connection. (2003-02-06 23:04:58 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Failed to open /dev/ttyACM0: Invalid argument
    pppd died: Serial port open failed (exit code 7)
    Starting connection. (2003-02-06 23:04:59 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Failed to open /dev/ttyACM0: Invalid argument
    pppd died: Serial port open failed (exit code 7)
    Starting connection. (2003-02-06 23:05:00 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Failed to open /dev/ttyACM0: Invalid argument
    pppd died: Serial port open failed (exit code 7)
    Starting connection. (2003-02-06 23:05:01 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Failed to open /dev/ttyACM0: Invalid argument
    pppd died: Serial port open failed (exit code 7)
    Starting connection. (2003-02-06 23:05:07 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Failed to open /dev/ttyACM0: Invalid argument
    pppd died: Serial port open failed (exit code 7)
    Reloading configuration.
    Reloading interfaces and providers.
    Selection of interface/provider "ppp0"/"Vizzavi" succeeded.
    Starting connection. (2003-02-06 23:09:09 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Perms of /dev/ttyS0 are ok, no 'mesg n' neccesary.
    pppd: --> WvDial: Internet dialer version 1.42
    pppd: --> Initializing modem.
    pppd: --> Sending: ATZ
    pppd: ATZ
    pppd: OK
    pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    pppd: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    pppd: OK
    pppd: --> Sending: ATM1
    pppd: ATM1
    pppd: OK
    pppd: --> Sending: ATX3
    pppd: ATX3
    pppd: OK
    pppd: --> Modem initialized.
    pppd: --> Sending: ATDT679190000
    pppd: --> Waiting for carrier.
    pppd: ATDT679190000
    Stopping connection. (2003-02-06 23:09:35 WET)
    pppd: Terminating on signal 15.
    pppd: Connect script failed
    We are disconnected. (2003-02-06 23:09:36 WET)
    pppd died: Connect script failed (exit code 8)
    Reloading configuration.
    Reloading interfaces and providers.
    Selection of interface/provider "ppp0"/"Vizzavi" succeeded.
    Starting connection. (2003-02-06 23:11:13 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Perms of /dev/ttyS0 are ok, no 'mesg n' neccesary.
    pppd: --> WvDial: Internet dialer version 1.42
    pppd: --> Initializing modem.
    pppd: --> Sending: ATZ
    pppd: ATZ
    pppd: OK
    pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    pppd: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    pppd: OK
    pppd: --> Sending: ATM1
    pppd: ATM1
    pppd: OK
    pppd: --> Sending: ATX3
    pppd: ATX3
    pppd: OK
    pppd: --> Modem initialized.
    pppd: --> Sending: ATDP679190000
    pppd: --> Waiting for carrier.
    pppd: ATDP679190000
    pppd: BUSY
    pppd: --> The line is busy. Trying again.
    pppd: --> Sending: ATDP679190000
    pppd: --> Waiting for carrier.
    pppd: ATDP679190000
    pppd: DELAYED 00:00:55
    pppd: --> Invalid dial command.
    pppd: --> Disconnecting at Thu Feb 6 23:12:04 2003
    pppd: Serial connection established.
    pppd: using channel 1
    pppd: Using interface ppp0
    pppd: Connect: ppp0 <--> /dev/ttyS0
    pppd: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4f6b9945> <pcomp> <accomp>]
    pppd: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4f6b9945> <pcomp> <accomp>]
    pppd: sent [LCP ConfNak id=0x1 <magic 0x79af1436>]
    pppd: rcvd [LCP ConfNak id=0x1 <magic 0x79af1436>]
    pppd: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xd9723b26> <pcomp> <accomp>]
    pppd: rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xd9723b26> <pcomp> <accomp>]
    pppd: sent [LCP ConfNak id=0x2 <magic 0xa92fab5f>]
    pppd: rcvd [LCP ConfNak id=0x2 <magic 0xa92fab5f>]
    pppd: sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x7fbabd9a> <pcomp> <accomp>]
    pppd: rcvd [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x7fbabd9a> <pcomp> <accomp>]
    pppd: sent [LCP ConfNak id=0x3 <magic 0xbb16daea>]
    pppd: rcvd [LCP ConfNak id=0x3 <magic 0xbb16daea>]
    pppd: sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x6e080df4> <pcomp> <accomp>]
    pppd: rcvd [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x6e080df4> <pcomp> <accomp>]
    pppd: sent [LCP ConfNak id=0x4 <magic 0xfd84ba6a>]
    pppd: rcvd [LCP ConfNak id=0x4 <magic 0xfd84ba6a>]
    pppd: sent [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0xff6767fe> <pcomp> <accomp>]
    pppd: rcvd [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0xff6767fe> <pcomp> <accomp>]
    pppd: sent [LCP ConfNak id=0x5 <magic 0x6f3d8fbd>]
    pppd: rcvd [LCP ConfNak id=0x5 <magic 0x6f3d8fbd>]
    pppd: sent [LCP ConfReq id=0x6 <asyncmap 0x0> <magic 0x90b86cc1> <pcomp> <accomp>]
    pppd: rcvd [LCP ConfReq id=0x6 <asyncmap 0x0> <magic 0x90b86cc1> <pcomp> <accomp>]
    pppd: sent [LCP ConfNak id=0x6 <magic 0x589d3554>]
    pppd: rcvd [LCP ConfNak id=0x6 <magic 0x589d3554>]
    pppd: sent [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0x9b6e2230> <pcomp> <accomp>]
    pppd: rcvd [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0x9b6e2230> <pcomp> <accomp>]
    pppd: sent [LCP ConfNak id=0x7 <magic 0x6869b5d>]
    pppd: rcvd [LCP ConfNak id=0x7 <magic 0x6869b5d>]
    pppd: sent [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0xa5a0be15> <pcomp> <accomp>]
    pppd: rcvd [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0xa5a0be15> <pcomp> <accomp>]
    pppd: sent [LCP ConfNak id=0x8 <magic 0x3a276c79>]
    pppd: rcvd [LCP ConfNak id=0x8 <magic 0x3a276c79>]
    pppd: sent [LCP ConfReq id=0x9 <asyncmap 0x0> <magic 0x5012dbb0> <pcomp> <accomp>]
    pppd: rcvd [LCP ConfReq id=0x9 <asyncmap 0x0> <magic 0x5012dbb0> <pcomp> <accomp>]
    pppd: sent [LCP ConfNak id=0x9 <magic 0x5781f2f7>]
    pppd: rcvd [LCP ConfNak id=0x9 <magic 0x5781f2f7>]
    pppd: sent [LCP ConfReq id=0xa <asyncmap 0x0> <magic 0x1a18dae2> <pcomp> <accomp>]
    pppd: rcvd [LCP ConfReq id=0xa <asyncmap 0x0> <magic 0x1a18dae2> <pcomp> <accomp>]
    pppd: sent [LCP ConfNak id=0xa <magic 0xd32c29a7>]
    pppd: rcvd [LCP ConfNak id=0xa <magic 0xd32c29a7>]
    pppd: Serial line is looped back.
    pppd: sent [LCP TermReq id=0xb "Loopback detected"]
    pppd: rcvd [LCP TermReq id=0xb "Loopback detected"]
    pppd: sent [LCP TermAck id=0xb]
    pppd: rcvd [LCP TermAck id=0xb]
    pppd: Connection terminated.
    pppd died: Loopback detected (exit code 17)
    Reloading configuration.
    Reloading interfaces and providers.
    Selection of interface/provider "ppp0"/"Vizzavi" succeeded.
    Starting connection. (2003-02-06 23:14:09 WET)
    pppd: Plugin passwordfd.so loaded.
    pppd: Perms of /dev/ttyS0 are ok, no 'mesg n' neccesary.
    pppd: --> WvDial: Internet dialer version 1.42
    pppd: --> Initializing modem.
    pppd: --> Sending: ATZ
    pppd: ATZ
    pppd: OK
    pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    pppd: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    pppd: OK
    pppd: --> Sending: ATM1
    pppd: ATM1
    pppd: OK
    pppd: --> Modem initialized.
    pppd: --> Sending: ATDT679190000
    pppd: --> Waiting for carrier.
    pppd: ATDT679190000
    pppd: NO DIALTONE
    pppd: --> No dial tone. Trying again in 5 seconds.
    pppd: --> Sending: ATDT679190000
    pppd: --> Waiting for carrier.
    pppd: ATDT679190000
    pppd: NO DIALTONE
    pppd: --> No dial tone. Trying again in 5 seconds.
    pppd: --> Sending: ATDT679190000
    pppd: --> Waiting for carrier.
    pppd: ATDT679190000
    Stopping connection. (2003-02-06 23:14:34 WET)
    pppd: Terminating on signal 15.
    pppd: Connect script failed
    We are disconnected. (2003-02-06 23:14:36 WET)
    pppd died: Connect script failed (exit code 8)




    alguém tem alguma sugestão?
    agradeço desde já.
     
  2. Tafinho

    Tafinho Power Member

    Aparece-te uma série de vezes isto:

    Dá a sensação que o número não está correcto ou que estás com problemas de linha...
    Porque ele nem sequer chega a mandar o login.
     
  3. FASC

    FASC Power Member

    Isso acontece porque é um Winmodem.... Eu li sobre isso e algumas distribuições não têm suporte para os Winmodems...


    Hugs.
     
  4. Savage

    Savage Power Member

    Lamento mas isso não é correcto, eu tenho 1 modem igual ao dele, e garanto-te que não só não é um winmodem, como tb já o meti a funcar no Red hat...Também tive problemas, já não me lembro mt bem, mas tens algures uma opção para desactivares o "wait for dial tone", que era o prob que eu tinha...
    Lamento não te ajudar mais, mas já não mexo em Linux á + de 1 ano...
    Porta-te...
     
  5. FASC

    FASC Power Member

    Segundo o que eu tinha lido era um winmodem..... Realmente o meu não era de porta série, mas interno (só vi agora que era de porta série). Isso que dizes deve ser verdade, mas eu também sei o que li! ;)

    Hugs.
     

Partilhar esta Página