Slimtype_DVD_A_DS8A2S_6A11 problemas DVD + R DL

[franciscojnc]

Boa noite,

Estou a colocar este tópico, pois o meu gravador está a dar problemas quando tento gravar em DVD + R DL da marca MediaRange
O imagburn tem esta informação:
"Slimtype DVD A DS8A2S 6A11 (ATAPI)Current Profile: DVD+R DL


Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 4.173.824
Free Space: 8.547.991.552 bytes
Free Time: 927:32:74 (MM:SS:FF)
Next Writable Address: 0
Supported Write Speeds: 2,4x; 4x; 6x


DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2.086.912
Changeable: Yes


Physical Format Information (ADIP - L0):
Disc ID: MBIPG101-R10-65
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.607
Last Physical Sector in Layer 0: 2.283.519


Physical Format Information (ADIP - L1):
Disc ID: MBIPG101-R10-65
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.607
Last Physical Sector in Layer 0: 2.283.519


Physical Format Information (Last Recorded - L0):
Disc ID: MBIPG101-R10-65
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.607
Last Physical Sector in Layer 0: 2.283.519


Physical Format Information (Last Recorded - L1):
Disc ID: MBIPG101-R10-65
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.607
Last Physical Sector in Layer 0: 2.283.519


Performance (Write Speed):
Descriptor 1...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 3.324 KB/s (2,4x) - WS: 3.324 KB/s (2,4x)
Descriptor 2...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 5.540 KB/s (4x) - WS: 5.540 KB/s (4x)
Descriptor 3...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 8.310 KB/s (6x) - WS: 8.310 KB/s (6x)"

Ocorre o erro de Power Calibration Area Error

Se utilizar o Nero ocorre o erro de "illegal disc"

O Pc é acer aspire 6935G

Preciso de ajuda...

Obrigado