Weemer
Power Member
oi pessoal, é o seguinte, tou com overclock a 3.4ghz e isto kuando ligo o pc aparece-me a dizer "overclock failed".
Será k n tá estável? N tenho tido bsods nem outro tipo de erros. Tou com esta configuração:
Ai Overclock Tuner ................. [Manual]
CPU Ratio Setting .................. [8.5]
FSB Frequency ...................... [400]
PCIE Frequency ..................... [100]
FSB Strap to North Bridge .......... [Auto]
DRAM Frequency ..................... [1066mhz]
DRAM Clock Skew on Channel A1 ...... [Auto]
DRAM Clock Skew on Channel A2 ...... [Auto]
DRAM Clock Skew on Channel B1 ...... [Auto]
DRAM Clock Skew on Channel B2 ...... [Auto]
DRAM Timing Control: Manual
1st
CAS# Latency : 5
RAS# to CAS# Delay : 5
RAS# Precharge : 5
RAS# ActivateTime : 15
RAS# to RAS# Delay : Auto
Row Refresh Cycle Time : Auto
Write Recovery Time : Auto
Read to Precharge Time : Auto
2nd
Read to Write Delay (S/D) : Auto
Write to Read Delay (S) : Auto
Write to Read Delay (D) : Auto
Read to Read Delay (S) : Auto
Read to Read Delay (D) : Auto
Write to Write Delay (S) : Auto
Write to Write Delay (D) : Auto
3rd
Write to Pre Delay : Auto
Reado to Pre Delay : Auto
Pre to Pre Delay : Auto
All Pre to Act Delay : Auto
All Pre to Ref Delay : Auto
DRAM Static Read Control ........... [Disable]
DRAM Read Training ................. [Disable]
MEM. OC Charger .................... [Auto]
Ai Clock Twister ................... [Auto]
Ai Transaction Booster ............. [Auto]
____________________________________
CPU Voltage ........................ [1.18v]
CPU GTL Voltage Reference (0/2) .... [Auto]
CPU GTL Voltage Reference (1/3) .... [Auto]
CPU PLL Voltage .................... [1.54]
FSB Termination Voltage............. [1.24]
DRAM Voltage ....................... [2.1]
NB Voltage ......................... [1.24]
NB GTL Reference ................... [Auto]
SB Voltage ......................... [1.10]
PCIE SATA Voltage .................. [1.5]
____________________________________
Load-Line Calibration .............. [Enable]
CPU Spread Spectrum ................ [Disable]
PCIE Spread Spectrum ............... [Disable]
CPU Clock Skew ..................... [Auto]
NB Clock Skew ...................... [Auto]
CPU Margin Enhancement ............. [Optimized]
Será k n tá estável? N tenho tido bsods nem outro tipo de erros. Tou com esta configuração:
Ai Overclock Tuner ................. [Manual]
CPU Ratio Setting .................. [8.5]
FSB Frequency ...................... [400]
PCIE Frequency ..................... [100]
FSB Strap to North Bridge .......... [Auto]
DRAM Frequency ..................... [1066mhz]
DRAM Clock Skew on Channel A1 ...... [Auto]
DRAM Clock Skew on Channel A2 ...... [Auto]
DRAM Clock Skew on Channel B1 ...... [Auto]
DRAM Clock Skew on Channel B2 ...... [Auto]
DRAM Timing Control: Manual
1st
CAS# Latency : 5
RAS# to CAS# Delay : 5
RAS# Precharge : 5
RAS# ActivateTime : 15
RAS# to RAS# Delay : Auto
Row Refresh Cycle Time : Auto
Write Recovery Time : Auto
Read to Precharge Time : Auto
2nd
Read to Write Delay (S/D) : Auto
Write to Read Delay (S) : Auto
Write to Read Delay (D) : Auto
Read to Read Delay (S) : Auto
Read to Read Delay (D) : Auto
Write to Write Delay (S) : Auto
Write to Write Delay (D) : Auto
3rd
Write to Pre Delay : Auto
Reado to Pre Delay : Auto
Pre to Pre Delay : Auto
All Pre to Act Delay : Auto
All Pre to Ref Delay : Auto
DRAM Static Read Control ........... [Disable]
DRAM Read Training ................. [Disable]
MEM. OC Charger .................... [Auto]
Ai Clock Twister ................... [Auto]
Ai Transaction Booster ............. [Auto]
____________________________________
CPU Voltage ........................ [1.18v]
CPU GTL Voltage Reference (0/2) .... [Auto]
CPU GTL Voltage Reference (1/3) .... [Auto]
CPU PLL Voltage .................... [1.54]
FSB Termination Voltage............. [1.24]
DRAM Voltage ....................... [2.1]
NB Voltage ......................... [1.24]
NB GTL Reference ................... [Auto]
SB Voltage ......................... [1.10]
PCIE SATA Voltage .................. [1.5]
____________________________________
Load-Line Calibration .............. [Enable]
CPU Spread Spectrum ................ [Disable]
PCIE Spread Spectrum ............... [Disable]
CPU Clock Skew ..................... [Auto]
NB Clock Skew ...................... [Auto]
CPU Margin Enhancement ............. [Optimized]